Features: Flomore Series 3500 chemical injection pumps are electric driven, positive displacement pumps utilizing C-faced motors and common gear reducers. The gear reducers are available in 15, 30, 60, and 120 strokes per minute configurations. By utilizing even further flexibility of a wide variety of plunger sizes, the Series 2500 can fill many application requirements of different flows and pressures.
The Series 3500 can have up to four, flow adjustable heads while running fluid ends.
OPTIONS: Ceramic plungers, which provide longer packing life, and a wide variety of packing are designed to meet the demands of many different chemical applications.

■ Maximum discharge pressure: 6,000 psi (414 bar) with 3/16” plunger
■ Maximum volume 139 gallons per day per head (528 liters per day) with 1/2” plunger
■ Each head is adjustable while running
■ Available simplex, duplex, triplex, or quadruplex configurations
■ Mix or match head sizes – pump the same or different chemicals
■ Available in four-stroke rates: 15, 30, 60, or 120 strokes per minute
■ Each head is independently coupled and easy to maintain in the fi eld
■ 1 or 3 phase, TEFC or explosion-proof, 50 or 60 Hz motors available
■ Available with 3/16”, 1/4”, 3/8”, or 1/2” plunger

Features: The Series 4400 pump utilizes an integral worm gear drive available in three different standard ratios and six plunger sizes to provide a wide selection of flows and pressures.

■ Positive Displacement
■ Up to 8 pumping heads driven by a single motor
■ Each pumping head capacity is fi eld adjustable 0 to 100% while running
■ Oil bath lubrication for long gear box life

Features: The Series 3400 electric driven injection pump utilizes C-faced motors and common gear reducer available in two speeds of 30 or 60 strokes per minute.

■ Maximum discharge pressure: 4,000 psi (276 bar) with 1/2” plunger
■ Maximum volume: 1760 GPD (6,662 Liters) with 1-1/4” plunger
■ Simplex, duplex or quad configuration
■ 1 or 3 phase – TEFC or explosion-proof motors available
■ Plunger sizes: 1/2”, 3/4”, 1”, 1-1/4”
■ Flow adjustable while running with adjustable crosshead

Features: The Series 5020 pump is designed for high flow and high-pressure applications.

■ Pressure as high as 10,000 psi
■ Designed for continuous operation
■ Excellent for pumping chemicals, methanol, and corrosion inhibitors
■ Field adjustable speed/volume control
■ Simple modifi cation can lower pumping rate to one stroke every five minutes
■ Operates with air/gas pressures as low as 15 psi
■ Trim for corrosive applications available
■ Microswitch design available
■ Regulator, gauges, and tanks available as accessories

Features: The Series 5200 pump is powered by gas/air via a diaphragm with a spring return. The pump offers two strokes for adjustable 1” or 1/3” lengths and flow rates.

■ Direct acting
■ Powered by diaphragm motor with spring return
■ Field adjustable speed/volume control
■ Operates with air/gas pressures as low as 8 psi
■ Trim for corrosive applications available
■ Micro switch design available
■ Regulators, gauges and tanks available as accessories

Features: The Series 6200 pump offers the highest flow rate, 20 gallons per minute, all the Flomore chemical injection pumps. This pump is well-suited for offshore applications with its optional three-part corrosive resistant paint system.

■ Positive displacement pump
■ Simplex or duplex offering
■ Field adjustable speed/volume control
■ Exhaust gas can be recovered to minimize gas consumption
■ Heads made from cast steel or 316 stainless steel
■ Minimum NDSHR – 8 feet of water
■ Trim for corrosive applications available
■ Regulators, gauges, and manifold available as accessories

Features: The Flomore 4400 parts including the gears are fully cross compatible with all major brands. Stocked locally at our Calgary warehouse, these parts are available for same day shipping. 

Features: Packing and O-Rings are available in a host of materials to match your chemical compatibility. We heavily stock SDP, Buna, Teflon, Viton, and many others. All of these are available in a variety of sizes to ensure a proper fit for your application.

Packing and O-Rings are fully cross compatible with most major pump brands.

Features: The Flomore Pilot & Microswitches for pneumatic pumps are cross compatible with other similar brands. These are readily available to ship same day.

Features: The Flomore chemical injection plungers are stocked in every standard size and are fully cross compatible with other pump brands.

Ceramic plungers are also available upon request to meet your chemical injection requirements.

Features: The Flomore pneumatic pump diaphragms are interchangeable with all major brands. Locally stocked and readily available for same day shipping.

Features: Designed specifically for operation on a beam pumped oil well, the Series 1300 pump is powered by a direct connection to the movement of a walking beam, rod line, or rocker arm.

■ Single or dual-headed units available
■ Simple design, easy maintenance