Features: The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life – Up to 5x longer diaphragm life for less maintenance and downtime
• Modular Air Valve – Stall-free, low pulsation operation provides smooth and rapid changeover
• One-Piece Center Section – Eliminates air leaks for more efficient operation
• Four Bolt Joint Design – Bolted design provides even sealing pressure for leak-free operation.
• Multiple Ports – Increased number of ports for installation flexibility
• Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
• 30% more efficient than the market leader
• 1 in (25.4 mm) connection
• Max flow: 189 lpm (50 gpm)
• Available materials of construction: Aluminum, Polypropylene, PVDF, Conductive Polypropylene, Hastelloy and Stainless Steel

Features: The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.

• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
• Expanded material offering to handle endless applications
• Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
• Offered in ATEX configuration
• 3/4 in (19.05 mm) center- and end-porting
• No seals to leak or fail
• Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks
• 1-1/2 in (38.1 mm) connection
• Max flow: 340 lpm (90 gpm)
• Available materials of construction: Polypropylene, PVDF, Aluminum and Stainless Steel

Features: The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

• Overall improved efficiency (up to 40% more efficient)
• Highest fluid flow rate in its class
• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
• Expanded material offering to handle endless applications
• Fewer parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the diaphragm pump
• 2 in (51 mm) ANSI end-porting
• Fluid flow up to 150 gpm (568 lpm)
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• Lube-free operation
• Epoxy-coated air section for tough environmental conditions
• Available materials of construction: Polypropylene, PVDF, Aluminum, Stainless Steel and Iron

Features: The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.

• Center and end porting options
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks
• 3/4 in (19.05 mm) center- and end-porting
• No seals to leak or fail
• Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks
• Max flow: 61 lpm (16 gpm)
• Available materials of construction: Aluminum and Stainless Steel

Features: 1:1 Fast-Flo Air Operated Piston Transfer Pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum lengths and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids.

• Flow rates up to 15.1 lpm (4 gpm)
• Immersed inlet for faster priming of heavier fluids
• Air-powered for high reliability and low cost
• Disc check options for lower viscosity fluids

Features: The QUANTM i120 with 2 IN (50.8 MM) port is Graco’s revolutionary new electric-operated double diaphragm (EODD) pump. With a lighter weight and smaller footprint than other electric options, it provides the ideal solution for factories or manufacturing plants focused on meeting sustainability goals by reducing their largest variable cost: energy. An i120 pump could pay for itself in 12 months or less while helping achieve compliance with increasingly tight regulations and earning significant rebates along the way.

Upgrade your existing air-operated pumps with a reliable new QUANTM i120 electric pump or spec it as part of a greenfield facility initiative. With a 2 IN (50.8 MM) port and maximum flow rate of 120 gallons per minute and a powerful new electric motor and drive that provides up to 8x more continuous torque at low speeds than conventional motors, the i120 is capable of handling most fluid transfer jobs to be the efficient workhorse you need on your production lines. Plus, the fast and easy plug-and-play installation — you simply plug it into any 240V outlet — allows you to easily replace existing pumps without additional investment or infrastructure rework.

• Wide operating range and materials compatibility—it handles abrasives, solids, aggressive chemicals, and shear-sensitive materials
• Up to 80% more efficient than AODD, 50% more efficient compared to competitive electric technologies—displacing fossil fuel, hydraulics and air power
• Up to 80% more efficient than AODD, 50% more efficient compared to competitive electric technologies—displacing fossil fuel, hydraulics and air power
• Electric drive control module includes a simple knob that adjusts pump speed, LED indicating status and trouble codes, and software required for pump operation
• Similar size to existing AODD, the removal of the gearbox reduces footprint compared to other electric options
• Self-priming and seal-less design that minimizes maintenance and spare parts costs
• The only electric diaphragm pump on the market that stalls under pressure, eliminating the need for pressure sensors and additional controllers and reducing downtime by preventing pump failures caused by clogged lines or closed valves
• Leak Detector and Flapper (optional)

Features: The QUANTM i120LP with 2 in. (51 mm) porting combines Graco’s revolutionary new electric operated double diaphragm (EODD) pump with proven flap-valve reliability. Providing the perfect solution for customers focused on meeting sustainability goals while offering the ability to move line-sized solids. This allows customers to reduce their largest variable cost: energy consumption.

Elevate your transfer process with a reliable new QUANTM i120LP industrial flapper pump, built for waste and trash in mines, sumps and in-plant applications. Pass solids up to nearly 2-inches without clogging and achieve flow rates up to 120 gallons per minute after a fast and easy plug-and-play installation. Graco’s new electric motor technology delivers up to 8x more continuous torque at low speeds than conventional motors, providing a solution that is up to 80% more efficient than pneumatic alternatives.

• Wide operating range and materials of compatibility – it handles abrasives, solids, and shear sensitive materials
• Up to 80% more efficient than AODD pumps
• Efficient electric drive module includes a simple one-touch knob that adjusts pump speed and pressure, LED indicator featuring system status and on-board diagnostics.
• Similar in size to existing AODD pumps – removal of gearbox reduces footprint compared to other electric options
• Self-priming and seal-less design minimizes maintenance and spare parts costs
• The only electric diaphragm pump on the market that stalls under pressure; eliminates the need for pressure sensors and additional controls. Reduces downtime by preventing pump failures caused by clogged lines or closed valves.
• Optional leak detector for enhanced safety and improved reliability

Features: The QUANTM i30 with 1 IN (25.4 MM) port is Graco’s revolutionary new electric operated double diaphragm (EODD) pump that provides the ideal solution for factories or manufacturing plants focused on meeting sustainability goals by reducing their largest variable cost: energy. An i30 pump could pay for itself in 12 months or less while helping achieve compliance with increasingly tight regulations and earning significant rebates along the way.

Upgrade your existing air-operated pumps with a reliable new QUANTM i30 electric pump or spec it as part of a greenfield facility initiative. With a 1 IN (25.4 MM) port and maximum flow rate of 30 gallons per minute, and a powerful new electric motor and drive that provides up to 8x more continuous torque at low speeds than conventional motors, the i30 is capable of handling most fluid transfer jobs to be the efficient workhorse you need on your production lines. Plus, the fast and easy plug-and-play installation — you simply plug it into any 120V outlet — allows you to easily replace existing pumps without additional investment or infrastructure rework.

• Wide operating range and materials compatibility—it handles abrasives, solids, aggressive chemicals, and shear-sensitive materials
• Up to 80% more efficient than AODD, 50% more efficient compared to competitive electric technologies—displacing fossil fuel, hydraulics and air power
• Electric drive control module includes a simple knob that adjusts pump speed, LED indicating status and trouble codes, and software required for pump operation
• Similar size to existing AODD, the removal of the gearbox reduces footprint compared to other electric options
• Self-priming and seal-less design that minimizes maintenance and spare parts costs
• The only electric diaphragm pump on the market that stalls under pressure, eliminating the need for pressure sensors and additional controllers and reducing downtime by preventing pump failures caused by clogged lines or closed valves
• Leak Sensor (optional)

Features: The QUANTM i80 with 1 1/2 IN (38.1 MM) port is Graco’s revolutionary new electric-operated double diaphragm (EODD) pump. With a lighter weight and smaller footprint than other electric options, it provides the ideal solution for factories or manufacturing plants focused on meeting sustainability goals by reducing their largest variable cost: energy. An i80 pump could pay for itself in 12 months or less with up to 50% manufacturing cost reduction while helping achieve compliance with increasingly tight regulations and earning significant rebates along the way.

Upgrade your existing air-operated pumps with a reliable new QUANTM i80 electric pump or spec it as part of a greenfield facility initiative. With a 1 1/2 IN (38.1 MM) port and maximum flow rate of 80 gallons per minute and a powerful new electric motor and drive that provides up to 8x more continuous torque at low speeds than conventional motors, the i80 is capable of handling most fluid transfer jobs to be the efficient workhorse you need on your production lines. Plus, the fast and easy plug-and-play installation — you simply plug it into any 240V outlet — allows you to easily replace existing pumps without additional investment or infrastructure rework.

• Wide operating range and materials compatibility—it handles abrasives, solids, aggressive chemicals, and shear-sensitive materials
• Up to 80% more efficient than AODD, 50% more efficient compared to competitive electric technologies—displacing fossil fuel, hydraulics and air power
• Unique high-torque density design displaces gears, belts, and chains to minimize weight/size and replaces copper “rat’s nest” with a simple, low-resistance circular coil and steel stator to drive efficiencies and reduce maintenance complexity
• Electric drive control module includes a simple knob that adjusts pump speed, LED indicating status and trouble codes, and software required for pump operation
• Similar size to existing AODD, the removal of the gearbox reduces footprint compared to other electric options
• Self-priming and seal-less design that minimizes maintenance and spare parts costs
• The only electric diaphragm pump on the market that stalls under pressure, eliminating the need for pressure sensors and additional controllers and reducing downtime by preventing pump failures caused by clogged lines or closed valves
• Leak Sensor (optional)

Features: With higher pump pressures and flow rates, Graco’s positive displacement priming piston pumps handle a broad range of inks with ease. Senator Transfer pumps offer durability, power, and reliability in many ink manufacturing or printing applications.

• Produces up to 1900 psi (131 bar) when mounted on a 800 pump
• Positive displacement priming piston design provides uniform and easily-controlled delivery
• Extremely durable pump with long-life packing design and low maintenance
• Evacuates pails, drums, and bins with ease

Features: Save up to 80% on energy costs when you choose a hydraulic piston pump! When paired with any of Graco’s priming piston pumps, the Viscount II hydraulic air motor offers exceptional cost savings by operating on 20% of the energy used by a pneumatic motor. The Viscount II, Graco’s patented hydraulic motor, replaces the King, Bulldog or Senator motors with the 800 or 2100 pump.

• Clean, quiet and efficient hydraulic power
• Extremely durable hydraulic pump with long-life packing design
• Highly efficient Viscount hydraulic motor reduces energy costs
• Stainless steel wetted parts with neoprene packing

Features: With only the hose in contact with the fluid being pumped and no check valves in the line, Graco’s SoloTech peristaltic pumps are ideal for materials that other pumps cannot handle. Abrasive, corrosive, shear-sensitive, and gas-entrapped fluids can easily be pumped or administered to your application.

• Efficient pumping action – One hose compression per revolution extends hose life
• Low maintenance – No valves, seals, or glands
• Reversible – Pumps can be used to empty lines or clear blockages
• Extended hose life – Only one hose compression per revolution

Our BLDC motor/gearbox can handle a very large flow rate range, avoiding the need for different gearboxes for multiple applications.