Features: Kenco Draw Down Calibraion Cylinders are used for these applications:
• To calibrate the flow rate of chemical metering pumps and chemical injection systems
• To periodically monitor the performance and accuracy of a chemical injection system
• To insert accurate dosages of chemical into batch processes

Dual Scale:
Total gauge volume in millimeters
Gallons per Hour or Liters per Hour scale for a one minute test of calibration to determine flow rate
Mylar laminated scales are protected from attack by harsh chemicals
Available in capacities ranging from 60 ML up to 10,000 ML
Models with threaded NPT connections on both ends or models with removable slip-on top caps available
Rugged construction using transparent PVC pipe and industrial grade PVC fittings
Sight tube material is clear and impact resistant superior grade PVC
Materials of construction are qualified to handle a wide range of chemicals
Lightweight and extremely easy to handle
Special sizes available upon request
Other materials also available

Features: The 5700 Series Gauge provides a visual means for checking the contents of a bulk tank and a means for checking the injection rate of a chemical metering pump. The gauge is designed to operate in low to medium pressure applications up to 500 psig.

The 5700 series has 1/2” MNPT x 3/8” FNPT threaded process connections. 1/2” to 2” flanged process connections are also available. The standard sight tube is 5/8” O.D. glass. Other sight tube options are also available upon request. The 17000 gauge is fitted with 1” MNPT process connections (flanged process connections are also available). The standard sight tube is 1” O.D. glass, which makes it ideal for viscous liquids.

Features: The 8800 Series Level Gauge features 90° connections for ease of installation. The Gauge is fitted with inline 1/4” FNPT vent and drain connections. Vent and drain connections are inline for routine maintenance of the level gauge. The centerline dimensional tolerance is ± 1/16”. This assures that the gauge will fit the mounting connection of the tank.

The gauge frame is available in carbon steel or 304 stainless steel. A wide variety of wetted materials are available, including carbon steel, 316 stainless steel, alloy 20, Hastelloy C-276, PVC, CPVC, Kynar, and high density polyethylene.

Features: The 929 Series Pump Setting Gauge provides a means for checking the pumping rate of any chemical pump under actual pumping conditions in one minute. The gauge mounts in the pump’s suction line between the reservoir tank and the pump. It provides a visual gauge showing the liquid level in the reservoir in addition to a rapid means for setting the pump. The maximum pump rate for the 929 Series is 45 Quarts per Day or 42.59 Liters per Day, with each mark on the scale representing 1 Quart/1 Liter per 24 hours. Models are available with a coupler plug so that the unit can be easily disconnected for calibrating several chemical pumps.

13″ Cast Aluminum Frame
No Test Valve
Wetted Parts 303 Stainless Steel, Aflas O-Ring Seals and Glass
1/4″ MNPT Mounting Thread
1/4″ FNPT Vent
Polycarbonate Metric Rate/Height Shield
Each Division is Pump Rate of 1 Ltr/24 Hrs.

Features: The KENCO Accu-Rate Pump Setting Gauge® utilizes precision scientific glass to provide the most accurate reading possible for calibrating the flow rate of a chemical metering pump. They are also used to periodically monitor the performance and accuracy of a chemical injection system. Additionally, the Accu-Rate Pump Setting Gauge® can be used as the primary containment reservoir of a fluid that will be pumped into a chemical injection system.

Precision borosilicate glass sight tube delivers precise rate calibration from 0.05% to 0.2%
Accu-Rate Pump Setting Gauge® will calibrate pump rates up to 1095 gallons per day and 4140 liters per day. Clear polycarbonate shield for impact resistance is standard on all models.
Five (5) scale options are available: U.S. gallons by volume (USG), gallons per day (GPD), gallons per hour (GPH), Liters per day (LPD) and Liters per hour (LPH) – Standard volumetric scale in ML on all units.

Features: Calibration Pots provide an accurate pump Calibration of higher pump flow rates. The totally enclosed construction assures maximum safety. The Gauge is installed between the suction side of the Chemical pump and the Tank. The Pump rate is checked by closing the Valve between the tank and gauge and observing the level change in the gauge for one minute.

Design utilizes a tank with Shielded tubular gauge for maximum protection from glass breakage. Provide a means for accurately checking the feed rates of a chemical metering pump. Manufactured in PVC, Carbon Steel and 316 Stainless Steel as standard materials. Can provide other materials to meet any chemical resistance requirements. Individually hand calibrated to assure maximum accuracy.

Features: The Environmental Protection Gauge (EPG) is easy to install. It installs just like tubular glass and is designed to replace your existing tubular glass. It will eliminate glass breakage and stop costly spills. The metal end connection of the gauge inserts into the valve stuffing box thus eliminating two common points for glass breakage:

Over-tightening of the glass packing
Breakage of glass at the packing nuts from impact to the gauge

Replaces unprotected tubular gauge glass.
• 360° visibility of fluid level.
• Red-line glass is standard for easy viewing of fluid level.
• The tubular valve packing nut tightens around 316 S.S. nozzles, not glass!
• Outer tube is high impact UV stabilized polycarbonate tubing.
• 316 S.S. nozzles available in a 5/8” O.D. or 3/4” O.D.
• Maximum overall length is 52 3/4”. For longer lengths, use Safeguard Level Gauge.
• Easy to install – Insert the 5/8” O.D. or 3/4” O.D. nozzles into the valves.
• Ideal for use with KENCO Tubular Valves (KTV).

Features: The 5700 Series Gauge provides a visual means for checking the contents of a bulk tank and a means for checking the injection rate of a chemical metering pump. The gauge is designed to operate in low to medium pressure applications up to 500 psig.

The 5700 series has 1/2” MNPT x 3/8” FNPT threaded process connections. 1/2” to 2” flanged process connections are also available. The standard sight tube is 5/8” O.D. glass. Other sight tube options are also available upon request. The 17000 gauge is fitted with 1” MNPT process connections (flanged process connections are also available). The standard sight tube is 1” O.D. glass, which makes it ideal for viscous liquids.

Features: The 8800 Series Level Gauge features 90° connections for ease of installation. The Gauge is fitted with inline 1/4” FNPT vent and drain connections. Vent and drain connections are inline for routine maintenance of the level gauge. The centerline dimensional tolerance is ± 1/16”. This assures that the gauge will fit the mounting connection of the tank.

The gauge frame is available in carbon steel or 304 stainless steel. A wide variety of wetted materials are available, including carbon steel, 316 stainless steel, alloy 20, Hastelloy C-276, PVC, CPVC, Kynar, and high density polyethylene.

Features: The 929 Series Pump Setting Gauge provides a means for checking the pumping rate of any chemical pump under actual pumping conditions in one minute. The gauge mounts in the pump’s suction line between the reservoir tank and the pump. It provides a visual gauge showing the liquid level in the reservoir in addition to a rapid means for setting the pump. The maximum pump rate for the 929 Series is 45 Quarts per Day or 42.59 Liters per Day, with each mark on the scale representing 1 Quart/1 Liter per 24 hours. Models are available with a coupler plug so that the unit can be easily disconnected for calibrating several chemical pumps.

13″ Cast Aluminum Frame
No Test Valve
Wetted Parts 303 Stainless Steel, Aflas O-Ring Seals and Glass
1/4″ MNPT Mounting Thread
1/4″ FNPT Vent
Polycarbonate Metric Rate/Height Shield
Each Division is Pump Rate of 1 Ltr/24 Hrs.

Features: The KENCO Accu-Rate Pump Setting Gauge® utilizes precision scientific glass to provide the most accurate reading possible for calibrating the flow rate of a chemical metering pump. They are also used to periodically monitor the performance and accuracy of a chemical injection system. Additionally, the Accu-Rate Pump Setting Gauge® can be used as the primary containment reservoir of a fluid that will be pumped into a chemical injection system.

Precision borosilicate glass sight tube delivers precise rate calibration from 0.05% to 0.2%
Accu-Rate Pump Setting Gauge® will calibrate pump rates up to 1095 gallons per day and 4140 liters per day. Clear polycarbonate shield for impact resistance is standard on all models.
Five (5) scale options are available: U.S. gallons by volume (USG), gallons per day (GPD), gallons per hour (GPH), Liters per day (LPD) and Liters per hour (LPH) – Standard volumetric scale in ML on all units.

Features: The Environmental Protection Gauge (EPG) is easy to install. It installs just like tubular glass and is designed to replace your existing tubular glass. It will eliminate glass breakage and stop costly spills. The metal end connection of the gauge inserts into the valve stuffing box thus eliminating two common points for glass breakage:

Over-tightening of the glass packing
Breakage of glass at the packing nuts from impact to the gauge

Replaces unprotected tubular gauge glass.
• 360° visibility of fluid level.
• Red-line glass is standard for easy viewing of fluid level.
• The tubular valve packing nut tightens around 316 S.S. nozzles, not glass!
• Outer tube is high impact UV stabilized polycarbonate tubing.
• 316 S.S. nozzles available in a 5/8” O.D. or 3/4” O.D.
• Maximum overall length is 52 3/4”. For longer lengths, use Safeguard Level Gauge.
• Easy to install – Insert the 5/8” O.D. or 3/4” O.D. nozzles into the valves.
• Ideal for use with KENCO Tubular Valves (KTV).