Features: Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve styles, sizes, and process connections. High pressure manual 2 way ball valves. 1/4″, 3/8″, 1/2″ and 1″ with working pressures to 20,000 psi ( 1379 bar). Features our one piece trunion mounted stem.

One-piece, trunnion mounted style, stem design eliminates shear failure and reduces the effects of side loading found in two piece designs.
• Re-torqueable seat glands for longer seat life.
• PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life and reduces operating torque.
• Quarter turn from open to close with positive stop.
• Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C).
• Optional o-rings available for high-temperature applications.
• Optional wetted materials.
• Wide selection of tube and pipe end fittings available.
• Electric and pneumatic actuator options.

Features: Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve styles, sizes, and process connections. High pressure manual 3 way ball valves. 1/4″, 3/8″, 1/2″ with working pressures to 20,000 psi (1379 bar). Features our one piece trunion mounted stem.

• One-piece, trunnion mounted style, stem design eliminates shear failure found in two piece designs and reduces effects of side loading.
• Re-torqueable seat glands for longer seat life.
• Carbon filled PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life and reduces operating torque.
• Available in 90° turn diverter and 180° turn switching models.
• Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C).
• Optional o-rings available for high-temperature applications.
• Optional wetted materials.
• Wide selection of tube and pipe end fittings available.
• Electric and pneumatic actuator options.

Features: Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve styles, sizes, and process connections. High pressure manual 4 way ball valves. 3/8″ with working pressures to 10,000 psi ( 690 bar). Features our one-piece trunion mounted stem.

• One-piece, trunnion mounted style, stem design eliminates shear failure found in two piece designs and
reduces the effects of side loading.
• Re-torqueable seat glands for longer seat life.
• Carbon filled PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life and reduces operating torque.
• Quarter turn crossover, and the half turn four way switching models available.
• Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C).
• Optional o-rings available for high-temperature applications.
• Optional wetted materials.
• Wide selection of tube and pipe end fittings available.
• Electric and pneumatic actuator options.

Features: Parker Autoclave Engineers ball valves can be supplied with either pneumatic or electric operators for automated or remote operation. Pneumatic and electric operators can be supplied with a variety of features and options. Operators are sized for each valve series to provide reliable and trouble free operation. Listed below are the operator features and available options.

Pneumatic Operators
• Used for remote and automatic operation
• Air-to-open/spring-to-close
• Air-to-close/spring-to-open
• Air-to-open and close (double acting)
• Limit switches or limit switches with visual indicators available
• High temperature option available.
• Stainless steel housing for corrosive applications available.
• Optional solenoid valve available
• Standard anodized aluminum housing
• Optional epoxy coated housing available Electric Operators
• Interface with control systems for automated operation and monitoring
• 120 & 220 VAC, 50/60 Hz standard
• 24VDC
• Explosion proof available
• CE mark available

Features: Parker Autoclave Engineers series 6DB double block valve is a two-stem ball valve providing an economical and convenient method of blocking and bleeding in applications such as pressure monitoring and test, chemical injection and drain line isolation. This full port quarter turn double ball valve is designed for operation up to 15,000 psi (1034 bar).

• One piece, trunnion mounted stem design eliminates shear failure and reduces the effects of side loading found in two piece designs.
• Re-torqueable seat glands for longer seat life.
• Carbon filled PEEK seats offer excellent resistance to chemicals, heat and wear/abrasion.
• Vee-stem vent valve.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life and reduces operating torque.
• Quarter turn from open to close with positive stop.
• Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C).

Features: Parker Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand in the petroleum industry as well as the need for externally pressurized components in other markets. Utilizing the same design technology as the standard ball valve, the subsea design incorporates the necessary design alterations to provide a reliable externally pressurized valve for the subsea industry. With the availability of fittings, tubing, and related equipment our ball valves can provide all your needs on high-pressure applications above or below the surface.

• One-piece, trunnion mounted style, stem design eliminates shear failure found in two-piece designs.
• Re-torqueable seat glands for longer seat life.
• PEEK seats which offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Buna-N o-ring standard 250°F (121°C) max.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life.
• Wide selection of tube and pipe end fittings available.
• Available to NACE MR-01-75.
• Optional wetted materials.
• Available in a number of flow configurations and port sizes.

Features: Available from Micro to Pilot scale in stainless steel or assorted high-temperature, corrosion resistant alloys. Parker Autoclave Engineers offer a variety of reactors for use with liquids, gases or solids with stationary, spinning or falling catalyst baskets. Corrosion resistant gradientless reactor is basic equipment for advancing the science of gas phase, solid phase, heterogeneous catalyst technology. This high pressure laboratory apparatus can be used for diverse supported and selective catalyst research, including catalyst screening, catalyst characterization, and surface chemistry studies. The leak-free metal gasket design provides bench-scale catalytic synthesis capability for scientific experimentation.

• Fixed Bed (Tube) Reactors
• High Pressure Stirred Laboratory (Batch) Reactors
• Berty Stationary Catalyst Basket
• Berty “Micro” Stationary Catalyst Basket
• Robinson-Mahoney Stationary Catalyst Basket
• Robinson-Mahoney “Micro” Stationary Catalyst Basket
• Mahoney-Robinson Spinning Catalyst Basket
• Carberry Spinning Catalyst Basket
• Harshaw Stationary and Falling Catalyst Basket

Features: The MicroClave™ reactor is a miniature, high pressure & high temperature, laboratory batch reactor. It is used for chemical synthesis of corrosive, hazardous & very reactive chemicals as well as catalyst research.

Pressure rating is 5,000 psig (345 bar) & temperature ratings are either 650°F (343°C) or 1,000°F (538°C). HASTELLOY® C-276 material is standard; other chemical /petrochemical /corrosion resistant alloys are offered. Standard 50 ml capacity is suitable for lab use as a continuous stirred tank reactor (CSTR) & slurry reactor. Process connections in the standard, low closing torque cover allows the vessel to be lowered with lines attached. Standard Dispersimax® impeller draws headspace gas & vapors into the liquid; other impellers are offered. Sparging (via purge fitting), charging, sampling & external cooling coil process connections are ideal for chemical reactor. The stirred reactor uses a 5,000 rpm MagneDrive® magnetic mixer that eliminates dynamic seals for trouble free mixing. Optional process control instrumentation measures & controls temperature, mixing speed & pressure. Obtain expert, process equipment advice from the manufacturer & ongoing support from the local, factory approved supplier. Metal-to-metal seals resists chemicals & extreme temperature.

Features: Parker Autoclave Engineers Inline Check Valves provide unidirectional flow and tight shut-off for liquids and gas with high reliability. When differential drops below cracking pressure*, valve shuts off. The Ball Check Valve has all-metal components, allowing it to be used up to 1200°F (649°C).

Materials: 316 Stainless Steel: body, cover, poppet, cover gland. 300 Series Stainless Steel: spring. Standard O-ring: Viton, for operation to 400° F (204°C). Buna-N or PTFE available for 250°F (121°C) or 400°F (204°C) respectively; specify when ordering. *Cracking Pressure: 20 psi (1.38 bar) ±30%. Springs for higher cracking pressures (up to 100 psi (6.89 bar) available on special order for O-ring style check valves only.

Features: Parker Autoclave Engineers relief valves provide reliable venting of gases or liquids for set pressures from 1,500 psi (103 bar) to 75,000 psi (5171 bar). These precision valves are designed for pressure gas systems, cryogenic systems, petrochemical applications and other special systems.

Series RVS relief valves utilize a soft seat design for reliable venting of gases at set pressures from 1,500 psi (103 bar) to 20,000 psi (1378 bar). The operating temperature range is 32°F (0°C) to 400°F (204°C). Series RVP relief valves provide reliable venting of gases or liquids for set pressures from 3,000 psi (206.8 bar) minimum to 75,000 psi (5171 bar). The standard temperature range for all models is -423° to 400° (-252° to 204°C). A high temperature option to 750°F (399°C) is also available.

Features: Parker Autoclave Engineers has two different styles of valves for extreme temperature. Standard valves can be supplied with packing for operation from -100°F (-73°C) to 800°F (427°C), or with the addition of an extended packing housing for operation from -423°F (-252°C) to 1200°F (649°C). The extended packing housing provides the means of removing the packing from the extreme temperature medium. Machined grooves on the housing act as a heatsink to remove heat or cold. The second, which is economically priced, is a modified standard designed for the power industry. It operates to 1200°F (649°C) with graphite packing and no extended packing housing.

Extreme Temperature Valve Features:
• The extreme temperature option can be ordered on low, medium, high, micro-metering and other valve series.
• Reliable long life operation with extended stuffing box at very high and low temperatures.
• Design available for operation to 1200°F (649°C) without extended packing housing.
• Available with a variety of tubing connections and orifice sizes.
• Non-rotating stem.
• Wide range of material options
• Adjustable packing below threads.
• Metal to metal seating.
• Anti-extrusion back-up rings.

Features: Parker Autoclave Engineers offers a complete line of standard adapters and couplings as well as special designs and materials.

Parker Autoclave Engineer’s standard adapters are available in low, medium, and high pressure configurations. Standard adapters are machined from cold worked stainless steel. Other materials are available upon request.

Features: Parker Autoclave Engineers high pressure fittings Series F and SF are the industry standard for pressures to 150,000 psi (10342 bar). Utilizing Parker Autoclave Engineers high pressure coned-and-threaded connections, these fittings are correlated with Series 30SC, 43SC, 30VM, 40VM, 60VM, 100VM, and 150V valves and Parker Autoclave Engineers high pressure tubing.

High Pressure Fittings, Tubing and Nipples Features:
• Coned-and-Threaded Connection.
• Available sizes are 1/4, 5/16, 3/8, 9/16, and 1”.
• Fittings manufactured from 316 cold worked or high strength stainless steel.
• Tubing is manufactured from dual rated 316/316L and 304/304L cold worked stainless steel.
• Operating Temperatures from -423°F (-252°C) to 1200°F (649°C).
• Anti-vibration connection components available.
• Ultra-high pressure components.
• Autofrettaged tubing.
• High pressure high cycle tubing.

Features: Parker Autoclave Engineers offers a complete line of standard adapters and couplings as well as special designs and materials.

Parker Autoclave Engineer’s standard adapters are available in low, medium, and high pressure configurations. Standard adapters are machined from cold worked stainless steel. Other materials are available upon request.

Features: Parker Autoclave Engineers Low Pressure Fittings are designed for use with low pressure valves and tubing. These fittings feature improved SpeedBite compression connections with larger orifices for excellent flow capabilities. Parker Autoclave Engineers fittings and components are manufactured of cold-worked type 316 stainless steel. Optional materials are available upon request.

Low Pressure Fittings and Tubing Features:
• Single-ferrule compression sleeve.
• Fast easy make-up of connection.
• Available sizes are 1/16”, 1/8”, 1/4”, 3/8”, & 1/2”.
• Fittings manufactured from cold worked 316 stainless steel.
• Tubing is manufactured from dual rated 316/316L and 304/304L annealed stainless steel.
• All items available in special materials.
• Operating temperatures from -100°F (-73°C) to 650°F (343°C).
• Molybdenum disulfide-coated gland nuts to prevent galling.

Features: Parker Autoclave Engineers pipe fittings, P Series, are designed for liquid and gas applications. Available from 1/4″ to 1″ NPT to 15,000 psi and temperatures to 400°F (204°C).

Pipe Fittings, Tubing and Nipples Features:
• Available sizes are 1/4″, 3/8″, 1/2″, 3/4″ and 1″
• Fittings and tubing manufactured from cold worked 316 stainless steel.
• Operating Temperatures from -423°F (-252°C) to 400°F (204°C).

Features: Parker Autoclave Engineers offers a complete line of standard adapters and couplings as well as special designs and materials.

Parker Autoclave Engineer’s standard adapters are available in low, medium, and high pressure configurations. Standard adapters are machined from cold worked stainless steel. Other materials are available upon request.

Features: Parker Autoclave Engineers medium pressure fittings, Series SF, are designed for use with Series 20SM medium pressure valves and Parker Autoclave Engineers’ medium pressure tubing. They incorporate medium pressure coned-and-threaded connections with orifices sized to match the high-flow Series 20SC valves.

Medium Pressure Fittings, Tubing and Nipples Features:
• Coned-and-Threaded Connection.
• Available sizes are 1/4″, 3/8″, 9/16″, 3/4″, 1″ and 1-1/2″.
• Fittings manufactured from cold worked 316 stainless steel.
• Tubing is manufactured from dual rated 316/316L and 304/304L cold worked stainless steel.
• Operating Temperatures from -423°F (-252°C) to 1200°F (649°C).
• Anti-vibration connection components available.
• All items available in special material.

Features: Parker Autoclave Engineers pipe fittings, P Series, are designed for liquid and gas applications. Available from 1/4″ to 1″ NPT to 15,000 psi and temperatures to 400°F (204°C).

Pipe Fittings, Tubing and Nipples Features:
• Available sizes are 1/4″, 3/8″, 1/2″, 3/4″ and 1″
• Fittings and tubing manufactured from cold worked 316 stainless steel.
• Operating Temperatures from -423°F (-252°C) to 400°F (204°C).

Features: Parker Autoclave Engineers Medium Pressure QS Fittings are designed for use with QS Series valves and medium pressure tubing. These fittings feature improved compression connections with larger orifices for excellent flow capabilities. Parker Autoclave Engineers fittings and components are manufactured of high strength stainless steel.

QS Medium Pressure Fittings and Tubing:
• Available sizes are 1/4, 3/8, 9/16, 3/4 and 1”.
• Fittings and tubing manufactured from high strength stainless steel.
• Molybdenum disulfide-coated gland nuts to prevent galling.
• Gland nut positioning mark for assembly.
• Single-ferrule compression sleeve.
• Connection weep holes for safety and leak detection.
• Fast easy make-up of connection.
• Operating Temperatures from 0°F (-17.8°C) to 650°F (343°C).
• 1″ QS fitting bodies are 2507 Super Duplex standard.

Features: Parker Autoclave Engineers MagnePumps eliminate or reduce many of the problems associated with conventional pumps, such as leakage, contamination and packing heat generation. They are ideal for applications where purity of the fluid is a major consideration or where leakage of material could be hazardous such as nuclear and petrochemical hydrates loops. In addition, power loss is eliminated due to no seal friction, delivering full motor horsepower to the pumping unit. Also, when adverse conditions exist the magnet drive functions as a clutch, eliminating overload and motor burnout.

Features: The Parker Autoclave Engineers’ Bolted Closure Reactor has been designed for reliable high pressure operation. The seal is a metal gasket machined from the same material as the vessel. Many combinations of standard components are available. The cover of the unit remains fixed in the stand to permit opening of the vessel without disassembling any process connections. The body is easily removed and drops away from the cover.

Versatile product configuration. Operating pressures as high as 5000 @ 950º F (345 bar @ 510º C). Open vessel and remove body without disassembling pressure connection. Available worldwide to meet codes such as ASME, CE, CRN. Insulated cover and vessel flange doe heating efficiency.

Features: The Parker Autoclave Engineers’ Bolted Closure Reactor has been designed for reliable high pressure operation. The seal is a metal gasket machined from the same material as the vessel. Many combinations of standard components are available. The cover of the unit remains fixed in the stand to permit opening of the vessel without disassembling any process connections. The body is easily removed and drops away from the cover.

Versatile product configuration. Operating pressures as high as 5000 @ 950º F (345 bar @ 510º C). Open vessel and remove body without disassembling pressure connection. Available worldwide to meet codes such as ASME, CE, CRN. Insulated cover and vessel flange doe heating efficiency.

Features: The Parker Autoclave Engineers’ Bolted Closure Reactor has been designed for reliable high pressure operation. The seal is a metal gasket machined from the same material as the vessel. Many combinations of standard components are available. The cover of the unit remains fixed in the stand to permit opening of the vessel without disassembling any process connections. The body is easily removed and drops away from the cover.

Versatile product configuration. Operating pressures as high as 5000 @ 950º F (345 bar @ 510º C). Open vessel and remove body without disassembling pressure connection. Available worldwide to meet codes such as ASME, CE, CRN. Insulated cover and vessel flange doe heating efficiency.

Features: The MagneDrive® agitator uses rare earth magnets, permitting packless mixing at higher speeds and with higher viscosity fluids. Outer drive magnets, rotated by a direct coupled motor exert powerful attraction on the encapsulated inner magnet assembly. As the outer drive magnets are rotated, the inner magnets are actuated, resulting in rotation of the agitator shaft.

Contamination-free mixing- Packless design eliminates shaft packing and need for lubrication.
Zero leakage to atmosphere- The MagneDrive® is a sealed system, closed to the atmosphere, so even sensitive fluids can be processed safely.Continuous, high speed operation- No need to shut down in mid-reaction to change failed packing.

Capable of mixing vessel sizes from 25 ml up to 150 ml. Capable of mixing at 3,600 rpm and 20,000 cps. Operating pressures as high as 5,400 psi @ 650° F (372 bar @ 343°C). In-line motor eliminates belts, reduces size, and creates nearly silent operation. Compact design with up to 5 in-lb (565 N-mm) of static torque. Designed for simple disassembly and maintenance. Bearings can be replaced with minimal effort. Carbon graphite and fluoropolymer with carbon fiber bearings available. Various connections available for existing AE and other pressure vessels as well as for glassware. Motors available up to 1/4 Hp. Various impellers available, contact factory for details.

Features: The MagneDrive® II agitator uses rare earth magnets, permitting packless mixing at higher speeds in larger vessels and with higher viscosity fluids. Outer drive magnets, rotated by a motor driven belt, exert powerful attraction on the encapsulated inner magnet assembly. As the outer drive magnets are rotated, the inner magnets are actuated, resulting in rotation of the agitator shaft. Contamination-free mixing: Packless design eliminates shaft packing and need for lubrication. Zero leakage to atmosphere: The MagneDrive® II is a sealed system, closed to the atmosphere, so even sensitive fluids can be processed safely. Continuous, high speed operation: No need to shut down in mid-reaction to change failed packing.

Capable of mixing gas as high as 1700 rpm. Operating pressures as high as 3,600 psi @ 650° F (455 bar @ 343°C). Carbon graphite and Rulon LR7 bearings available.

Features: The MagneDrive® agitator uses rare earth magnets, permitting packless mixing at higher speeds and with higher viscosity fluids. Outer drive magnets, rotated by a motor driven belt exert powerful attraction on the encapsulated inner magnet assembly. As the outer drive magnets are rotated, the inner magnets are actuated, resulting in rotation of the agitator shaft. Contamination-free mixing: Packless design eliminates shaft packing and need for lubrication. Zero leakage to atmosphere: The MagneDrive® is a sealed system, closed to the atmosphere, so even sensitive fluids can be processed safely. Continuous, high speed operation: No need to shut down in mid-reaction to change failed packing. Liquid Cooled: Water cooling (user supplied) for over-temperature protection of magnets and bearings. Cooling flow is not always required and can vary depending on vessel operating temperature and drive speed.

Capable of mixing vessel sizes from 50 ml up to 4000 ml. Capable of mixing at 3,300 rpm and 20,000 cp. Operating pressures as high as 6,000 psi @ 650° F (414 bar @ 343°C). Compact design with 7-16 in-lb (0.79 to 1.8 N-m) of static torque. Designed for simple disassembly and maintenance. Bearings can be replaced with minimal effort. Carbon graphite and fluoropolymer with carbon fiber bearings available.

Features: Parker Autoclave’s ZipperClave®, with standard sizes from 500 to 4,000 ml, is designed for applications requiring frequent and/or quick opening of the vessel. The closure is achieved using a resilient spring or “zipper” located in a groove machined into the body and cover, and an O-ring seal. To remove the cover, simply release the safety sleeve and pull the zipper handle. A safety lock engages the spring when it is fully inserted.

Operating Pressure of 2,000 psi (138 bar). Maximum Temperature rating 450°F (232°C). Vessel ID’s of 3 & 5″ (76.2 & 127 mm), IL’s of 4.59 to 12.32″ (116 to 313 mm). Custom sizes available. 316SS (Standard) for all wetted parts, other options include HASTELLOY®, Titanium, MONEL®, and Nickel. (HASTELLOY® is trademark of Haynes International INC. MONEL® is trademark of Special Metals Company). Complete systems with controls, pumps, and valves/fittings/tubing available . “No tools needed” closure. Heaters, furnaces, and cooling jackets/coils available. Bench-top or floor stands available. Parker Autoclave Engineers Speedbite connections standard (adapters available for different sizes/types).

Features: Parker Autoclave Engineers MagnePumps eliminate or reduce many of the problems associated with conventional pumps, such as leakage, contamination and packing heat generation. They are ideal for applications where purity of the fluid is a major consideration or where leakage of material could be hazardous such as nuclear and petrochemical hydrates loops. In addition, power loss is eliminated due to no seal friction, delivering full motor horsepower to the pumping unit. Also, when adverse conditions exist the magnet drive functions as a clutch, eliminating overload and motor burnout.

Features: Parker Autoclave Engineers has two different styles of valves for extreme temperature. Standard valves can be supplied with packing for operation from -100°F (-73°C) to 800°F (427°C), or with the addition of an extended packing housing for operation from -423°F (-252°C) to 1200°F (649°C). The extended packing housing provides the means of removing the packing from the extreme temperature medium. Machined grooves on the housing act as a heatsink to remove heat or cold. The second, which is economically priced, is a modified standard designed for the power industry. It operates to 1200°F (649°C) with graphite packing and no extended packing housing.

Extreme Temperature Valve Features:
• The extreme temperature option can be ordered on low, medium, high, micro-metering and other valve series.
• Reliable long life operation with extended stuffing box at very high and low temperatures.
• Design available for operation to 1200°F (649°C) without extended packing housing.
• Available with a variety of tubing connections and orifice sizes.
• Non-rotating stem.
• Wide range of material options
• Adjustable packing below threads.
• Metal to metal seating.
• Anti-extrusion back-up rings.

Features: Parker Autoclave Engineers high-pressure needle valves are available in seven different series for applications such as the chemical/petrochemical, water-blast, water-jet, research, and oil and gas industries. The Parker Autoclave Engineers high-pressure valve line utilizes a coned-and-threaded connection design providing a leak tight reliable connection for gas and liquid service. These valves are complemented by a complete line of fittings, tubing and accessories.

• Tubing sizes from 1/4” to 1”.
• Non-rotating stem prevents stem/seat galling.
• Rising stem/barstock body design.
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater
durability for repeated on/off cycles and excellent corrosion resistance.
• For dependable stem and body sealing 30SC, 43SC and 30VM valves are furnished with PTFE
encapsulated packing; the 40VM and 60VM valves feature nylon/leather packing below threads.
• Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and
reduced handle torque.
• Choice of Vee or Regulating stem tips.

Features: Parker Autoclave Engineers has a flow control valve to remotely control process flow at high pressure for vital component to processing operations. Parker Autoclave Engineers’ control valve utilizes their standard Micro-metering valve coupled to an electric actuator. The combination of these two precision, high quality components, provide a superior low flow control valve for use with liquids and gases.

Electric Flow Control Valve Features:
• Sizes 1/8″, 1/4″ and 3/8″
• Cv: 0.004
• Precise, accurate control
• Temperatures: -100°F to +600°F
• End connections: low pressure and high pressure Autoclave
• Materials: 316 SS, special materials available
• Controller Enclosure Rating: IP65 Weatherproof

Features: Parker Autoclave Engineers offers a complete series of high pressure valves and fittings for wellhead christmas trees. Parker Autoclave Engineers components are designed and manufactured to meet or exceed API and other applicable specifications for wellhead equipment, as well as Parker Autoclave Engineers’ own exacting standards for safety, reliability and service life under high pressure operation. Parker Autoclave Engineers “SOG” components meet or exceed all requirements of NACE MR0175-2002.

Pressure/Temperature Ratings: Valves and fittings for standard service are rated for working pressure up to 60,000 psi (4137 bar) at 100°F (38°C). Type SOG components are rated up to 30,000 psi (2068 bar) at 100°F (38°C). Sizes: Parker Autoclave Engineers’ type SOG valves and fittings are supplied with standard API test and gauge connections (Parker Autoclave Engineers’ F562C).

Features: Parker Autoclave Engineers MicroMetering valves are designed for applications where more precise control of small flows is required than is possible with a standard regulating stem. Barrel and Thimble micrometer design permits settings to be repeated. Metering is effected by a finely tapered stem acting in a precisely mated replaceable seat. Very fine stem position is achieved utilizing a 40 TPI thread. The Barrel and Thimble are set for proper metering at the factory.

MicroMetering Valve Features:
• Barrel and Thimble design permits repeatable settings.
• Barrel divisions every 0.025”
• 25 Thimble divisions, each representing 0.001” stem travel
• One revolution = 0.025” stem travel
• Cold-worked type 316 stainless steel body with stainless steel packing gland. Stem and seat are cold-worked type 316 stainless steel.
• Packing below stem threads is PTFE for the 10VRMM and 30VRMM valves and nylon leather for the 60VRMM. For packing options, see Technical Information Section.

Features: Parker Autoclave Engineers’ Wellhead Gauge valves are designed for reliable shut-off service at a maximum working pressure of 30,000 psi (2068 bar). The Wellhead Gauge and Bleed Valves are standard in 316 stainless steel material. Special materials available on request.

Gauge Valve Features:
• One inlet, three outlet ports
• Metal-to-metal bubble tight shut-off
• Packing below stem threads
• Two piece non-rotating stem on standard valves
Bleed Valve Features:
• One piece hex construction allows easy installation
• Vent port tapped for plumbing to safe area
• Tee handle for easy operation
• Positive blow out prevention on stem
• 1/8” NPT outlet connection

Features: Parker Autoclave Engineers’ yoke valves are extra heavy duty, plant grade instrument valves for industrial and severe service applications. Yoke valves feature low closing torque for ease of operation and are designed for use with Parker Autoclave Engineers medium and high pressure tubing and fittings.

Yoke Valve Features:
• Tubing sizes from 9/16” to 1”.
• Rising stem/barstock body design.
• Non-rotating stem prevents stem/seat galling.
• Metal-to-metal seating achieves bubble-tight shutoff, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
Needle Valves Pressures to 50,000 psi (3447 bar)
Y Series Yoke
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.
• Choice of Vee or Regulating stem tips.
• Available in two body patterns.
• Optional materials for cryogenic and other applications.

Features: The Parker Autoclave Engineers Explosion Proof Electric Flow Control valves are designed to operate up to 60,000 psi depending on the model number. The valves are “fail-as-is” meaning the valve maintains its last position on signal or power failure.

Electrical Power
Power Required: 24 VDC/72 Watt Maximum
Input Impedance: 250 Ohms (4-20 mA input)
Environmental
Atmosphere: NEC CLASS I, DIV 1, GROUP B,C,D
Operating Temperature (Actuator): -40º to 85º C

Features: Parker Autoclave Engineer’s valves are available with diaphragm or piston type actuators. Six sizes of air actuators (light, heavy light, medium, heavy duty or extra heavy, single and double stage) are offered to meet the service requirements of Parker Autoclave Engineer’s Low, Medium and High Pressure valves. Both air-to-open (normally closed) and air-to-close (normally open) designs are included in the product line. Optional air to open and close are available upon request.

Air Operator
• Maximum allowable working pressure: 100 psi (6.89 bar)
• Allowable diaphragm temperature range: -40°F to 200°F (-40°C to 93°C)
• Area of diaphragm: Light duty – 4.9 sq. in (31.6 sq. cm), Medium duty – 19.6 sq. in (126.5 sq. cm), Heavy duty – 45.66 sq. in (294.58 sq. cm)
• Approximate air usage/cycle @ 100 psi (6.89 bar): Light duty – .007 SCF (.00019 SCM), Medium duty – .07 SCF (.0019 SCM), Heavy duty – .2 SCF (.0056 SCM)

Features: These valves are a non-rotating rising stem design, working pressures to 15,000 psi (1034 bar). Tubing sizes range from 1/8″ to 1/2″. Tubing connections utilizes Parker Autoclave Engineers Speed Bite single ferrule design. Operating temperatures from 0°F to 650°F (-17.8°C to 343°C). 316 stainless steel construction, other options available.

Low Pressure Valve Features:
• 10V Series valve design provides in-line tube connections for 1/4” to 1/2” tube sizes.
• SW Series valve design provides increased flow capabilities.
• Tubing sizes from 1/8” to 1/2”.
• Rising stem/bar stock body design.
• Non-rotating stem prevents stem/seat galling.
• Metal-to-metal seating achieves bubble-tight shutoff, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.
• Choice of Vee or Regulating stem tips.
• Available in five body patterns.

Features: All series are a non-rotating rising stem design, working pressures up to 15,000 psi (10,345 bar). Featuring FNPT pipe connections from 1/4″ to 1″. Operating temperatures from 0°F to 400°F (-17°C to 204°C). 316 stainless steel construction, other options available.

Pipe Valve Features:
• P Series valve design provides in-line pipe connections for 1/4” to 1” pipe sizes. 1/8 connections offset.
• Rising stem/bar stock body design.
• Non-rotating stem prevents stem/seat galling (1/8″ NPT rotating stem design).
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.
• Choice of Vee or Regulating stem tips.
• Operating temperature range from -423°F (-252°C) to 400°F (204°C).

Features: Parker Autoclave Engineers Medium Pressure valves are a non-rotating rising stem design, working pressures to 20,000 psi (1379 bar). Tubing sizes range from 1/4″ to 1-1/2″.Tubing connections utilizes Parker Autoclave Engineers coned and threaded design. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other options available.

Medium Pressure Valve Features:
• Largest-port valves available for medium pressure applications.
• Tubing sizes available from 1/4” to 1”.
• Rising stem/bar stock body design.
• Non-rotating stem prevents stem/seat galling.
• New one piece stem design permits ease of assembly and packing replacement.
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.
• Choice of Vee or Regulating stem tip.
• Available in five body patterns.

Features: Parker Autoclave Engineers series MVBB block and bleed valve is a two stem manifold valve providing an economical and convenient method of blocking, bleeding and calibrating pressure transmitters and gauges. The valve utilizes the mini valve packing and stem design making it compact and easy to use. The valve can be surface or panel mounted for safe operation. In addition, manifold style valves reduce the number of fittings and space required for installation.

Block and Bleed Features:
• MVBB Series valve design provides large valve performance in a small package
• Tubing sizes: 1/4″ and 3/8″
• Rising stem/bar stock body design.
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem and packing gland design have been selected to achieve extended thread cycle life and reduced handle torque.

Features: Designed for blocking, bleeding, and calibration. This valves is a rotating rising stem design, rated to 20,000 psi (1379 bar). Tubing size 1/4-1″. Tubing connections utilizes the coned joint design. Operating temperatures from 0°F to 450°F (-17.8°C to 232°C). 316 stainless steel construction, other options available.

Block and Bleed Features:
• 20DBNV Series valve design provides large valve performance in a small package.
• Tubing sizes: 1/4″ to 1″.
• Rising stem/barstock body design.
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem and packing gland design have been selected to achieve extended thread cycle life and reduced handle torque.
• Temperatures from -100°F (-73°C) to 600°F (316°C)

Features: Parker Autoclave Engineers Medium Pressure 15K valves are a non-rotating rising stem design, working pressures to15,000 psi (1034 bar). Tubing size: 1-1/2″. Tubing connections utilizes Parker Autoclave Engineers coned and threaded design. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other options available.

Medium Pressure Valve Features:
• Largest-port valve available for medium pressure applications.
• Tubing size 1-1/2″.
• Rising stem/barstock body design.
• Non-rotating stem prevents stem/seat galling.
• New one piece stem design permits ease of assembly and packing replacement.
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.
• Choice of Vee or Regulating stem tip.
• Available in two body patterns.

Features: Parker Autoclave Engineers diverter valves provide the ability to direct incoming flow to one of two outlets. Flow is changed by rotating the handle in or out causing a double-ended stem to block the flow path to the outlet not needed. Diverter valves eliminate the need for multiple valves and the possibility of error in flow direction changes.

AE Diverter Valve Features:
• Diverts incoming flow to one of two outlet lines.
• Tubing sizes from 9/16” to 1”.
• Rising stem/bar stock body design.
• Non-rotating stem prevents stem/seat galling.
Needle Valves Pressures to 20,000 psi (1379 bar) 20DV Series Diverter
• Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.

Features: Parker Autoclave Engineers has a flow control valve to remotely control process flow at high pressure for vital component to processing operations. Parker Autoclave Engineers’ control valve utilizes their standard Micro-metering valve coupled to an electric actuator. The combination of these two precision, high quality components, provide a superior low flow control valve for use with liquids and gases.

Electric Flow Control Valve Features:
• Sizes 1/8″, 1/4″ and 3/8″
• Cv: 0.004
• Precise, accurate control
• Temperatures: -100°F to +600°F
• End connections: low pressure and high pressure Autoclave
• Materials: 316 SS, special materials available
• Controller Enclosure Rating: IP65 Weatherproof

Features: Parker Autoclave Engineers offers a complete series of high pressure valves and fittings for wellhead christmas trees. Parker Autoclave Engineers components are designed and manufactured to meet or exceed API and other applicable specifications for wellhead equipment, as well as Parker Autoclave Engineers’ own exacting standards for safety, reliability and service life under high pressure operation. Parker Autoclave Engineers “SOG” components meet or exceed all requirements of NACE MR0175-2002.

Pressure/Temperature Ratings: Valves and fittings for standard service are rated for working pressure up to 60,000 psi (4137 bar) at 100°F (38°C). Type SOG components are rated up to 30,000 psi (2068 bar) at 100°F (38°C). Sizes: Parker Autoclave Engineers’ type SOG valves and fittings are supplied with standard API test and gauge connections (Parker Autoclave Engineers’ F562C).

Features: The Parker Autoclave Engineers Explosion Proof Electric Flow Control valves are designed to operate up to 60,000 psi depending on the model number. The valves are “fail-as-is” meaning the valve maintains its last position on signal or power failure.

Electrical Power
Power Required: 24 VDC/72 Watt Maximum
Input Impedance: 250 Ohms (4-20 mA input)
Environmental
Atmosphere: NEC CLASS I, DIV 1, GROUP B,C,D
Operating Temperature (Actuator): -40º to 85º C

Features: Parker Autoclave Engineer’s valves are available with diaphragm or piston type actuators. Six sizes of air actuators (light, heavy light, medium, heavy duty or extra heavy, single and double stage) are offered to meet the service requirements of Parker Autoclave Engineer’s Low, Medium and High Pressure valves. Both air-to-open (normally closed) and air-to-close (normally open) designs are included in the product line. Optional air to open and close are available upon request.

Air Operator
• Maximum allowable working pressure: 100 psi (6.89 bar)
• Allowable diaphragm temperature range: -40°F to 200°F (-40°C to 93°C)
• Area of diaphragm: Light duty – 4.9 sq. in (31.6 sq. cm), Medium duty – 19.6 sq. in (126.5 sq. cm), Heavy duty – 45.66 sq. in (294.58 sq. cm)
• Approximate air usage/cycle @ 100 psi (6.89 bar): Light duty – .007 SCF (.00019 SCM), Medium duty – .07 SCF (.0019 SCM), Heavy duty – .2 SCF (.0056 SCM)

Features: Parker Autoclave Engineers has designed a compact (miniature) high pressure liquid pump that delivers high pressure hydraulic power in a mobile, easy to use package. At only 8 ½” tall the pumps easy-to-understand features permit our customers to spend their time thinking about how to use the pump, not where they are going to place it… Our pumps are designed to include the most competitive options and require only the basic of choices be made. Autoclave pumps are designed to work, and work well. High Pressure Pumps are compact and easy to transport which makes them the first choice for offshore oil and gas field gauge testing.

Powder Coated Steel, Stainless Steel or Aluminum Frame Options. Single or Dual Pump Systems with or without reservoir. Utilizes any Combination ASL, ACL, ACHL, AFL, or AHL Air-Driven Liquid Pumps. Outlet Pressures to 60,000 PSI (4140 bar) – Flows to 7.6 GPM (29 lpm). Vertical or Horizontal Frame Designs with Optional Casters. Totally Self Contained-Electricity not Required, Only Air. All Air Controls Included, No Lubrication Needed. Isolation Valves, Relief Valves, Rupture Disks, Stroke Counters and other Options Available.

Features: The Parker Autoclave Engineers Bolted Closure (confined gasket) pressure vessels are widely accepted for their simplicity, ease of assembly and flexibility. Particularly suited to applications calling for agitation, they are full opening with the entire vessel I.D. available for cover openings and connections. Additional openings can be machined in the body flange and bottom of vessel. Parker Autoclave Engineers Bolted Closure vessels feature the Gasche™ confined gasket design for reliable sealing even at very high temperatures. It is shaped to effect a tight metal-to-metal seal on the body and cover and is reusable over many openings and closings of the vessel.

Operating pressures of 2,000 to 6,000 psi (138 to 413 bar). Operating temperatures to 1,400° F (760°C) at reduced pressures. Standard vessel ID’s from 1.51 to 6.5 ” (46 to 165 mm), IL’s from 7 to 24″ (178 to 610 mm). Optional O-ring gaskets available for lower temperature applications. 316SS standard. Material options include HASTELLOY®, MONEL®, INCONEL®, Titanium and Nickel. (HASTELLOY®is trademark of Haynes International Inc. INCONEL®and MONEL®are trademarks of Special Metals Co.). Special Sizes available on request. Complete systems with controls, pumps, and valves/fittings/tubing available. ASME Code Stamp/CRN Registration, CE, TUV, other codes (upon request and review) available. Bench-top or floor stands available. Removable liners allow for research flexibility.

Features: Parker Autoclaves’ EZE-Seal® , in sizes 60 to 4,000 ml, is an easy opening vessel with the advantages of a bolted closure, without the high bolt torque. Designed with an easy to assemble loose flange, the EZE-Seal® also has a unique, reusable metal seal. Silver plating of the seal provides lubrication, and allows for many closure openings before replacement is necessary. If properties permit or the temperature requirement is lower, O-rings can be substituted.

Pressure ratings of 1,100 or 3,300 psi (76 or 228 bar). Maximum temperature ratings of 850°F (454°C). Vessel ID’s from 1 to 5″ (25 to 127 mm), IL’s from 2.06 to 12.31″ (52 to 313 mm). Double Delta metal seal permits easy and repeated closing. Optional O-ring gaskets available for lower temperature applications. 316SS standard. Material options include HASTELLOY®, MONEL®, INCONEL®, Titanium and Nickel. (HASTELLOY® is trademark of Haynes International Inc. INCONEL® & MONEL® are trademarks of Special Metals Company). In like pressure ranges, vessel bodies are interchangeable. Heaters, furnaces, and internal/external cooling available. Suited for agitation if application arises. Bench or floor stands available.

Features: The Sentinel Series Controller is an integrated package utilizing a powerful Programmable Logic Controller (PLC) for all process control, monitoring, and coordination in conjunction with a touch-screen operator display unit. The Sentinel provides the operator with a concise point of control for all processes related to a reactor system. In its standard configuration the unit controls and monitors the reactor internal and external temperature, the speed of the mixer, and the reactor pressure.

Temperature Control by an internal thermocouple. Mixer Speed Control sensor attached to MagneDrive®. Pressure Control via a pressure transducer attached to reactor. Flow Control capability of one or two integrated Mass Flow Controllers (MFC). WatchTower Software allows up to four Sentinel units on a single workstation.

Features: Parker Autoclave Engineers (UHC) Universal Heater Controller provides the temperature required for the majority of our stirred and non-stirred reactor systems. The unit will provide the customer with a complete temperature control solution for his system including the optional data acquisition/control package if required.

PID control of electric heaters up to 15 Amps using internal circuitry. Adjustable setpoint ramping and auto tuning of temperature. An Over-Temperature control function will shutdown the vessel’s electric heater if the skin temperature exceeds alarm setpoint. An automatic reset function restarts the reactor when temperature cools below setpoint. 120/240 VAC, 50/60 Hz supply power capability.

Features: The URC II Controller is an integrated package utilizing a Programmable Logic Controller (PLC) for all process control, monitoring and coordination in conjunction with a touch screen operator display unit. The URC II provides the operator with a concise point of control for all processes related to a reactor system. The unit controls and monitors the reactor’s external and internal temperatures, the speed of the mixture, and the pressure within the reactor.

Controls an electric heater, 120 VAC or 240 VAC (Internal 20 Amp Temperature Control). Controls an electric motor, 120 VAC handles a 90 VDC 1/2 hp motor, 240 VAC handles a 180 VDC 1/2 hp motor. 3-1/2” Diagonal Color Touchscreen user interface. Two (2) Type ‘K’ Thermocouples degree C or degree F readouts. Non-Latching overtemp control action. Closed Loop DC motor speed control. Pressure Indication Range up to 689 bar (10000 psi). User adjustable in the field. Extra analog input & output for controlling a single Mass Flow Controller or Mass Flow Meter, or an Analog Valve. Non-Latching overtemp control action. RJ11 connector for RS232 communication (the URC II comes with an adapter to adapt to 9 pin sub D). CE marked. UL/CUL listed. Can be used for all Parker Autoclave units, from 25 ml to 4,000 ml volumes. Pressure control and indication is set at the factory, options are available (contact factory for more information). Bar/psi pressure units. Tachometer sensor input. Pressure transducer input . Two (2) digital 120 VAC or 240 VAC outputs to operate solenoid valves. URC II controller is shipped with flying leads, but is designed to accept a standard 30 amp plug.

Features: Parker Autoclave Engineers has two different styles of valves for extreme temperature. Standard valves can be supplied with packing for operation from -100°F (-73°C) to 800°F (427°C), or with the addition of an extended packing housing for operation from -423°F (-252°C) to 1200°F (649°C). The extended packing housing provides the means of removing the packing from the extreme temperature medium. Machined grooves on the housing act as a heatsink to remove heat or cold. The second, which is economically priced, is a modified standard designed for the power industry. It operates to 1200°F (649°C) with graphite packing and no extended packing housing.

Extreme Temperature Valve Features:
• The extreme temperature option can be ordered on low, medium, high, micro-metering and other valve series.
• Reliable long life operation with extended stuffing box at very high and low temperatures.
• Design available for operation to 1200°F (649°C) without extended packing housing.
• Available with a variety of tubing connections and orifice sizes.
• Non-rotating stem.
• Wide range of material options
• Adjustable packing below threads.
• Metal to metal seating.
• Anti-extrusion back-up rings.

Features: Parker Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand in the petroleum industry as well as the need for externally pressurized components in other markets. Utilizing the same design technology as the standard ball valve, the subsea design incorporates the necessary design alterations to provide a reliable externally pressurized valve for the subsea industry. With the availability of fittings, tubing, and related equipment our ball valves can provide all your needs on high-pressure applications above or below the surface.

• One-piece, trunnion mounted style, stem design eliminates shear failure found in two-piece designs.
• Re-torqueable seat glands for longer seat life.
• PEEK seats which offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Buna-N o-ring standard 250°F (121°C) max.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life.
• Wide selection of tube and pipe end fittings available.
• Available to NACE MR-01-75.
• Optional wetted materials.
• Available in a number of flow configurations and port sizes.

Features: Parker Autoclave Engineers offers a complete series of high pressure valves and fittings for wellhead christmas trees. Parker Autoclave Engineers components are designed and manufactured to meet or exceed API and other applicable specifications for wellhead equipment, as well as Parker Autoclave Engineers’ own exacting standards for safety, reliability and service life under high pressure operation. Parker Autoclave Engineers “SOG” components meet or exceed all requirements of NACE MR0175-2002.

Pressure/Temperature Ratings: Valves and fittings for standard service are rated for working pressure up to 60,000 psi (4137 bar) at 100°F (38°C). Type SOG components are rated up to 30,000 psi (2068 bar) at 100°F (38°C). Sizes: Parker Autoclave Engineers’ type SOG valves and fittings are supplied with standard API test and gauge connections (Parker Autoclave Engineers’ F562C).

Features: Parker Autoclave Engineers’ Wellhead Gauge valves are designed for reliable shut-off service at a maximum working pressure of 30,000 psi (2068 bar). The Wellhead Gauge and Bleed Valves are standard in 316 stainless steel material. Special materials available on request.

Gauge Valve Features:
• One inlet, three outlet ports
• Metal-to-metal bubble tight shut-off
• Packing below stem threads
• Two piece non-rotating stem on standard valves
Bleed Valve Features:
• One piece hex construction allows easy installation
• Vent port tapped for plumbing to safe area
• Tee handle for easy operation
• Positive blow out prevention on stem
• 1/8” NPT outlet connection

Features: Parker Autoclave Engineers’ yoke valves are extra heavy duty, plant grade instrument valves for industrial and severe service applications. Yoke valves feature low closing torque for ease of operation and are designed for use with Parker Autoclave Engineers medium and high pressure tubing and fittings.

Yoke Valve Features:
• Tubing sizes from 9/16” to 1”.
• Rising stem/barstock body design.
• Non-rotating stem prevents stem/seat galling.
• Metal-to-metal seating achieves bubble-tight shutoff, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
Needle Valves Pressures to 50,000 psi (3447 bar)
Y Series Yoke
• PTFE encapsulated packing provides dependable stem and body sealing.
• Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.
• Choice of Vee or Regulating stem tips.
• Available in two body patterns.
• Optional materials for cryogenic and other applications.

Features: Parker Autoclave Engineers’ extensive records allow us to offer spare parts for virtually any piece of equipment we have sold. Our technical support personnel are ready to assist you in determining the parts you may need to keep your unit performing flawlessly.

Minimize lost production. Many parts in stock. Same day emergency service available on in stock items. Highly experienced, factory trained staff. Recommended spares tailored to your equipment. Optimize the usefulness of your existing equipment. Supported by technical expertise from Autoclave’s engineering department. Confidence in the correct application of the upgrade. Highly experienced, factory trained staff. As an optional, our technical services group can install your upgrade.

Features: The bolted closure reactor is a versatile high pressure & high temperature, laboratory batch reactor. It is used for chemical synthesis of corrosive, hazardous & very reactive chemicals / petrochemicals as well as materials research. The 5,500 psi @ 650°F (379 bar @ 343°C) pressure rating is based on the stress level limits of ASME Boiler and Pressure Vessel Code Section VIII Division 1. See the “Bolted Closure Pressure Vessels” bulletin for pressure ratings at other temperatures. The cover of the unit remains fixed in the stand to permit opening of the vessel without disassembling any process connections. the body is easily removed and drops away from the cover.

316SS & HASTELLOY® C-276 materials are standard; other corrosion resistant alloys are offered. Maximum Pressure is 5,500 psi @ 650º F (379 bar @ 343ºC). Metal-to-metal seals resists chemicals & extreme temperature. Standard capacity range of 100 to 4,000 ml is used as a lab continuous stirred tank reactor (CSTR) or slurry reactor. Process fittings in the cover (one for adding powders e.g. catalysts) allows lowering the tank with lines attached. Sparging, charging, blowpipe, sampling & cooling coil process connections are ideal for most chemical reactor processes. The MagneDrive® magnetic mixer used in the stirred reactor eliminates dynamic seals & assures trouble free mixing. It has a maximum speed of 3,300 rpm dependent on style of drive and customer process. The straight wall design allows access to the full diameter & depth of the reactor once the full size cover is removed. Optional process control instrumentation measures & controls temperature, mixing speed & pressure. High pressure reactor equipment is delivered custom configured & after full functional testing for fast & easy start-up.

Features: The EZE-Seal® high pressure & high temperature, laboratory chemical reactor is easily sealed using low torque. The “Double Delta” metal gasket creates a seal with low clamping force by a wedging action in V-shaped grooves. The 3,300 psi @ 850°F (227 bar @ 454°C) pressure rating is based on the stress level limits of ASME Boiler and Pressure Vessel Code Section VIII Division 1. (An ASME code stamp is optional). See the “EZE-Seal® Pressure Vessels” bulletin for pressure ratings at other temperatures.

The closure design can be sealed with O-rings for improved sealing ease with compatible process fluids / temperatures. 316SS & HASTELLOY® C-276 materials are standard; other corrosion resistant alloys are offered. Standard capacity range of 100 to 4,000 ml is suitable for lab use as a continuous stirred tank reactor (CSTR) & slurry. Access to the interior is easy since the vessel can be lowered with all the process fittings & tubing attached to the cover. A large diameter fitting (with valve) in the cover is used for adding powders & solids including catalysts & initiators. Sparging, charging, blowpipe, sampling & cooling coil process connections are ideal for most chemical reactor processes. The stirred reactor uses a 3,300 rpm MagneDrive® magnetic mixer that eliminates dynamic seals for trouble free mixing. Optional process control instrumentation measures & controls temperature, mixing speed & pressure. Obtain expert, process equipment advice from the manufacturer & ongoing support from the local, factory approved supplier.

Features: Parker Autoclave Engineers’ Mini-Reactor is designed as a compact, low volume reactor that includes the full functionality of larger research reactors. The low cost and compact design allows the researcher to quickly set up a multi-reactor lab for high-throughput parallel testing. Utilized in Chemical, Petrochemical, Environmental including: Catalyst and Reaction, Kinetics Screening, Fischer-Tropsch, and Hydrogenation environments. Parker Autoclave Engineers’ Mini-Reactor facilitates tomorrows requirements in a small proven stirred reactor package for University and Research facilities the world over.

2,900psi at temperatures up to 600ºF (depending upon O-Ring material). Volumes of 25, 50, 100, and 150 ml. Design Pressure of 3,000 psi at 600º F (207 Bar at 315º C). 316SS and Hastelloy C-276 stock materials for quick delivery. Simple hand-tight O-ring closure for quick opening. Compact design featuring the MagneDrive III agitator. Control of Temperature, Pressure, and Speed available. Compact design for simple integration into a multi-reactor system. Glove box friendly.

Features: The Parker Autoclave Engineers’ ZipperClave® Reactor has been designed to provide the researcher with a reliable quick-opening closure. The main seal of the reactor is an O-ring available in many different materials. The 500 ml and 1,000 ml units are identical in design as well as the 2,000 ml and 4,000 ml units except for the depth of the reactor. Conversion kits are available between the four sizes. Many combinations of standard components are available. The cover of the unit remains fixed in the stand to permit opening of the vessel without disassembling any process connections. The body is easily removed and drops away from the cover.

Versatile product configuration. Operating pressures as high as 1,900 psi @ 450ºF (131 bar @ 232ºC). Maximum Allowable Working Pressure (MAWP) – Design Pressure: 2,200 psi @ 450ºF (151 bar @ 232ºC). Maximum Design Metal Temperature: 40ºF @ 2,200 psi (4ºC @ 151 Bar). Maximum Recommended Operating Pressure (MROP: Varies based on gauge, transducer, and rupture disk selection. Material: 316 Stainless Steel or Hastelloy® C-276. Open vessel and remove body without disassembling pressure connections. Available worldwide to meet codes such as CE and CRN.

Features: Parker Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand in the petroleum industry as well as the need for externally pressurized components in other markets. Utilizing the same design technology as the standard ball valve, the subsea design incorporates the necessary design alterations to provide a reliable externally pressurized valve for the subsea industry. With the availability of fittings, tubing, and related equipment our ball valves can provide all your needs on high-pressure applications above or below the surface.

• One-piece, trunnion mounted style, stem design eliminates shear failure found in two-piece designs.
• Re-torqueable seat glands for longer seat life.
• PEEK seats which offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Buna-N o-ring standard 250°F (121°C) max.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life.
• Wide selection of tube and pipe end fittings available.
• Available to NACE MR-01-75.
• Optional wetted materials.
• Available in a number of flow configurations and port sizes.

Features: Parker Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand in the petroleum industry as well as the need for externally pressurized components in other markets. Utilizing the same design technology as the standard ball valve, the subsea design incorporates the necessary design alterations to provide a reliable externally pressurized valve for the subsea industry. With the availability of fittings, tubing, and related equipment our ball valves can provide all your needs on high-pressure applications above or below the surface.

• One-piece, trunnion mounted style, stem design eliminates shear failure found in two-piece designs.
• Re-torqueable seat glands for longer seat life.
• PEEK seats which offer excellent resistance to chemicals, heat, and wear/abrasion.
• Full-port flow path minimizes pressure drop.
• 316 cold worked stainless steel construction.
• Buna-N o-ring standard 250°F (121°C) max.
• Low friction pressure assisted graphite filled PTFE stem seal increases cycle life.
• Wide selection of tube and pipe end fittings available.
• Available to NACE MR-01-75.
• Optional wetted materials.
• Available in a number of flow configurations and port sizes.

Features: The Parker Autoclave Engineers Electric Flow Control valves are designed to operate up to 60,000 psi depending on the model number. The valves are “fail-as-is” meaning the valve maintains its last position on signal or power failure.

Features: Parker Autoclave Engineers has a flow control valve to remotely control process flow at high pressure for vital component to processing operations. Parker Autoclave Engineers’ control valve utilizes their standard Micro-metering valve coupled to an electric actuator. The combination of these two precision, high quality components, provide a superior low flow control valve for use with liquids and gases.

Electric Flow Control Valve Features:
• Sizes 1/8″, 1/4″ and 3/8″
• Cv: 0.004
• Precise, accurate control
• Temperatures: -100°F to +600°F
• End connections: low pressure and high pressure Autoclave
• Materials: 316 SS, special materials available
• Controller Enclosure Rating: IP65 Weatherproof

Features: The Parker Autoclave Engineers Explosion Proof Electric Flow Control valves are designed to operate up to 60,000 psi depending on the model number. The valves are “fail-as-is” meaning the valve maintains its last position on signal or power failure.

Electrical Power
Power Required: 24 VDC/72 Watt Maximum
Input Impedance: 250 Ohms (4-20 mA input)
Environmental
Atmosphere: NEC CLASS I, DIV 1, GROUP B,C,D
Operating Temperature (Actuator): -40º to 85º C

Features: Parker Autoclave Engineer’s valves are available with diaphragm or piston type actuators. Six sizes of air actuators (light, heavy light, medium, heavy duty or extra heavy, single and double stage) are offered to meet the service requirements of Parker Autoclave Engineer’s Low, Medium and High Pressure valves. Both air-to-open (normally closed) and air-to-close (normally open) designs are included in the product line. Optional air to open and close are available upon request.

Air Operator
• Maximum allowable working pressure: 100 psi (6.89 bar)
• Allowable diaphragm temperature range: -40°F to 200°F (-40°C to 93°C)
• Area of diaphragm: Light duty – 4.9 sq. in (31.6 sq. cm), Medium duty – 19.6 sq. in (126.5 sq. cm), Heavy duty – 45.66 sq. in (294.58 sq. cm)
• Approximate air usage/cycle @ 100 psi (6.89 bar): Light duty – .007 SCF (.00019 SCM), Medium duty – .07 SCF (.0019 SCM), Heavy duty – .2 SCF (.0056 SCM)