Features: TESCOM™ 54-2100 Series Backpressure Liquid Regulator: 54-2100 Series backpressure regulator is suitable for 15,000 psig / 1034 bar liquid applications. Modifications are also available for 20,000 psig / 1379 bar and 30,000 psig / 2068 bar. Hardened Stainless Steel seat and stem provide excellent wear resistance in harsh applications. Ideal for use in pump discharge pressure control, chemical injection and burst testing.

Maximum Inlet Pressure: 15,000 psig / 1034 bar
Controlled Pressure Ranges
0-500, 0-800, 10-1500, 15-2500, 25-4000, 50-6000, 200-10,000,
300-15,000 psig
Design Proof Pressure: 150% maximum rated
Leakage: Maximum 2 drops/minute at 150 SUS at 2500 psig / 172 bar
Ambient Operating Temperature: -15°F to 165°F / -26°C to 74°C
Flow Capacity: Cv = 0.08
Maximum Operating Torque: 40 in-lbs / 4.5 N•m

Features: CEJN has over 40 years of experience in quick connect coupling technology for high-pressure hydraulics and offers a wide range of products with operating pressures up to 43,500 PSI (3000 bar), CEJN High-Pressure Hydraulic couplings are specially designed for ultra high pressure pumps, rescue equipment and other demanding applications. Presented here are couplings and nipples, hoses, pressure gauges and porting blocks for high-pressure hydraulic applications.

Nominal flow diameter 2.5 mm (3/32″)
Flow capacity 4.6 l/min (1.0 GPM UK)
Max. working pressure 300.0 MPa
Min. burst pressure 600.0 MPa
Temperature range -20°C – +80°C (-4°F – +176°F)
Material coupling Hardened black finish steel
Material nipple Hardened black finish steel
Material seal Nitrile (NBR) other sealing materials on request

Features: The CEJN High-pressure hose is a spiralized steel reinforced polymer hose that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kinkresistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing.

• Ultra-high working pressures
• Maintained flexibility through entire service life
• Low volumetric expansion
• Smooth inner bores
• Kink-resistant steel-reinforced construction
• Abrasion-resistant covers
• Small outside diameter
• Superior chemical resistance

Features: CEJN Alert Ring
– Visual safeguards to ensure proper connection

In rough and stressful work environments there is always a risk that the coupling may not be completely connected, CEJN alert ring is a visual safeguard to ensure proper connection. If the red ring is visible, the coupling isn’t connected.

Features: TESCOM™ 50-2200 Series Pressure Regulator Hydraulic: 50-2200 Series pressure reducing regulator is specifically designed for extended life operation in high pressure hydraulic applications. Suitable for wellhead control panels, subsea valve actuation, chemical injection and Hydraulic Power Units (HPU).

Maximum Inlet Pressure: 15,000, 20,000 psig / 1034, 1379 bar
Maximum Outlet Pressure
300-15,000 psig / 20.7-1034 bar
300-20,000 psig / 20.7-1379 bar
Design Proof Pressure: 150% maximum rated
Leakage: 2 drops/min. at 150 S.U.S and 2500 psig / 172 bar
Operating Temperature: -15°F to 165°F / -26°C to 74°C
Flow Capacity: Cv = 0.06, 0.12

Features: TESCOM™ 54-2100 Series Backpressure Liquid Regulator: 54-2100 Series backpressure regulator is suitable for 15,000 psig / 1034 bar liquid applications. Modifications are also available for 20,000 psig / 1379 bar and 30,000 psig / 2068 bar. Hardened Stainless Steel seat and stem provide excellent wear resistance in harsh applications. Ideal for use in pump discharge pressure control, chemical injection and burst testing.

Maximum Inlet Pressure: 15,000 psig / 1034 bar
Controlled Pressure Ranges
0-500, 0-800, 10-1500, 15-2500, 25-4000, 50-6000, 200-10,000,
300-15,000 psig
Design Proof Pressure: 150% maximum rated
Leakage: Maximum 2 drops/minute at 150 SUS at 2500 psig / 172 bar
Ambient Operating Temperature: -15°F to 165°F / -26°C to 74°C
Flow Capacity: Cv = 0.08
Maximum Operating Torque: 40 in-lbs / 4.5 N•m

Features: Heavy Duty Valves
Heavy Duty Line – directional control for fluids and gasses up to 6,000 psi
Shear-Seal® Manual Control Valve
Applications
Land-based and offshore drilling equipment
Steel mills
Nitrogen charging panels
Refineries and chemical processing plants
Power generation facilities

Working Pressure: Air (pneumatic) up to 4,000 psi (276 bar)
hydraulic oil or lubricated water up to 6,000 psi (413 bar)
Flow Capacity, Cv: See table
Back Pressure: Must not exceed 250 psi (17.2 bar) at return port for satisfactory operation
Pressure Drop: 14 psi (0.96 bar) at 20 ft/sec
See Supplemental Guide for more detailed information
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port (3,000 psi [206 bar])

Features: High Pressure OEM Valves
High Pressure OEM Valve line up to 3000 psi
Shear-Seal® Manual Control Valve
Applications
Hydraulic presses
Military equipment
Paper mill controls
Hydraulic pilot valves
Railroad maintenance equipment
Halon fill systems

Working Pressure: Hydraulic fluid up to 3000 psi (206 bar)
Back Pressure: Must not exceed 250 psi (17.2 Bar) at return port for satisfactory operation
Pressure Drop: 14 psi (0.96 bar) at 20 ft/sec
See Supplemental Guide for more detailed information
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port (3000 psi [206 bar])

Features: High Pressure Valve
Shear-Seal® high pressure directional control valve for fluids and gasses up to 15,000 psi
Applications
Offshore drilling equipment
Refineries and chemical processing plants
Gas compression systems
Marine umbilical reels

Working Pressure: Standard to 10,000 psi (690 bar)
Optional to 15,000 psi (1,034 bar) (on 1/4” model only)
Flow Capacity, Cv: See table
Back Pressure: Must not exceed 250 psi (17.2 bar) at return port for satisfactory operation
Pressure Drop: 14 psi (0.96 bar) at 20 ft/s
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port (3,000 psi [206 bar]) maximum

Features: Subplate Mounted Heavy Duty Valve
Sub-plate mounted manifold valve – Shear-Seal® directional control for fluids and gasses up to 4,500 psi
Applications
Steel mills
Shipboard hydraulic control systems
Refineries and chemical processing plants
Power generation facilities

Working Pressure: Hydraulic oil or lubricated water up to 4,500 psi (310 bar)
Flow Capacity, Cv: See table
Back Pressure: Must not exceed 250 psi (17.2 Bar) at return port for satisfactory
operation
Pressure Drop: 14 psi (0.96 bar) at 20 ft/sec
* See Supplemental Guide for more detailed information
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port (3,000 psi [206 bar])
Media Temperature
Range:
-40° to +250°F (-40° to +121°C)

Features: Barksdale’s Microtorque® valve provides superior directional control for fluid power applications up to 6,000 psi where compact design and virtually zero leakage* are a must. Utilizing Barksdale’s Shear-Seal® technology, the Microtorque® valve offers reliable performance and lapped metal-to-metal sealing surfaces that will easily tolerate contaminated fluids. This valve offers many options that make it extremely versatile including panel mounting, spring return, 2 or 3 position detents, DO3 manifold mounting, and non-interflow. Leveraging the flexibility and unique features of the Microtorque® valve, along with its superior performance, can result in bottom line savings and operational benefits for your customers.

Media: Hydraulic oil
Working Pressure: 6,000 psi (415 bar) **
Flow Capacity, Cv: See table
Back Pressure: Must not exceed 250 psi (17.2 bar)*** at return port for satisfactory operation
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port
Media Temperature
Range:
-40° to +250°F (-40° to +121°C)
Porting: 1/4” NPT, SAE for 1/4” tubing, or DO3 pattern for manifold mounting

Features: The Model 8014, part of the new 8010 series, incorporates all the manufacturing knowledge and experience that has earned Barksdale a reputation for top quality and reliability in the market. This unit is a 3/4″ NPT relief valve intended for use in hydraulic systems. All stainless steel internals and a corrosion-resistant powder-coated external housing makes this product perfect for heavy industrial environments in the most demanding applications.

Working Pressure: Hydraulic oil up to 5500 psi (380 bar)
Proof Pressure: 10,000 psi (690 bar)
Pressure Ranges: 200 – 500 psi (15 – 35 bar)
500 – 1500 psi (35 – 105 bar)
1500 – 3500 psi (105 – 240 bar)
3500 – 5500 psi (240 – 380 bar)
Flow Rate: 15 GPM (NOMINAL)
Wetted Material: Fitting: Heat-treated 410 stainless steel
Internals: 416 stainless steel
Spring: Powder-coated high strength steel
Ball: Tungsten Carbide
Housing: Powder-coated ductile iron
Pressure Connection: 3/4” NPTM x 3/4” NPTF
Temperature Range: -40° to +200°F (-40° to +93°C)

Features: Barksdale’s Series 9000 Valves control hydraulic fluids and gasses up to 350 psi. Featuring Barksdale’s famous Shear-Seal® technology, the Series 9000 Valves offer dependable performance and long life for manual control of commercial and industrial process applications. The versatile design of this valve offers the ability to tailor the perfect configuration to meet your installation requirements.

Working Pressure: Pneumatic or hydraulic from 150
psi to 350 psi (10.3 to 24.1 bar); see table
Cv, Minimum Orifice: See table
Back Pressure: Must not exceed 250 psi (17.2 bar) at return port for satisfactory operation
Proof Pressure: 1-1/2 times working pressure except at return port (without damage to valve)
Burst Pressure: 2-1/2 times working pressure except at return port (300 psi, 20.7 bar)

Features: Barksdale’s Low Pressure OEM Valve line provides exceptional directional control for fluids and gasses up to 500 psi in the toughest industrial applications. Using Barksdale’s Shear-Seal® technology the OEM Valve products offer dependable performance and long life even when the media being controlled is contaminated with debris that would ruin ordinary valves. Flexibility is built into the Low Pressure OEM Valve line which features several standard options that can be adapted to meet the unique needs that OEM customers require in their products.

Working Pressure: Gasses or hydraulic fl uids up to 500 psi (34 bar)
Flow Capacity, Cv: See table
Back Pressure: Must not exceed 250 psi (17.2 bar) at return port for satisfactory operation
Pressure Drop: 14 psi (0.96 bar) at 20 ft/sec
See Supplemental Guide for more detailed information
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port (500 psi [34 bar])

Features: Barksdale’s patented Series II valve provides an optimal solution by combining the dependable features of our heavy duty Shear-Seal® valves with the reliability of a rack and pinion pilot actuator, all in one integrated package. With the ability to handle high velocity flows at pressures up to 6000 psi and tolerate contaminated media, the Series II valve becomes the choice for the toughest applications.

Working Pressure: Hydraulic up to 3,000 or 6,000 psi (206 bar or 413 bar)
Air up to 2,000 or 4,000 psi (138 or 276 bar)
Back Pressure: Must not exceed 250 psi (17.2) bar at return port for satisfactory operation
Proof Pressure: 1-1/2 times working pressure except at return port
Burst Pressure: 2-1/2 times working pressure except at return port (3,000 psi [206 bar])
Pressure Drop
(all Valves):
Porting: 1/4”, 3/8”, 1/2”, 3/4”, 1”, & 1-1/2”
NPT Standard (SAE J1926 Option)
Media Temperature
Range:
-40° to +250°F (-40° to +121°C)

Features: CEJN Hydraulic couplings are suitable for applications with operating pressures reaching up to 10,153 PSI (700 bar). By using CEJN Hydraulic couplings, pollution through hydraulic fluid leakage is reduced and helps to protect the environment from harm. Presented here are couplings, nipples, and pressure testing systems for all types of hydraulic applications.

04 Series X65 – Steel
Flat-Face couplings & nipples in 7 body sizes. Meets and exceeds the demands in the ISO 16028 Standard. Made of plated steel with a working pressure of up to 500 bar.
11 Series X66 – Stainless Steel
Flat-Face couplings & nipples in 4 body sizes. Dimensionally in accordance with the ISO 16028 Standard. Made of stainless steel with a working pressure of up to 250 bar.
15 Series X64 – Pressure Relief
Flat-Face nipples with pressure eliminator in 5 body sizes. Interchangeable with all ISO 16028 couplings. Made of plated steel with a working pressure of up to 500 bar.
21 Classic Range
CEJN’s classic couplings & nipples in 4 body sizes. Made of plated steel and plated brass/steel with a working pressure of up to 320 bar.

Features: CEJN Multi-X allows you to
• Minimize downtime during tool changes
• Connect the hydraulic lines with residual pressure
• Install multi-plates in confined spaces
• Use working pressure up to 35 MPa
• Eliminate cross connection

Max. working pressure……………….35 MPa
Min. burst pressure…………………….120 MPa
Temperature range……………………..-30°C to +100°C (-22°F to +212°F)
Material female plate…………………..Zinc plated steel, anodized aluminum, zinc, brass
Material male plate……………………..Zinc plated steel, anodized aluminum, brass
Material seal……………………………….Nitril (NBR)
Disconnection under pressure……To be avoided. Residual pressure can result in recoil effect during disconnection. Always grip the lever firmly.
Comment……………………………………Contact CEJN technical support for recommendations for high impulse applications.

Features: Barksdale’s Model 20415 is a sensitive pressure-control device used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy, repeatability and high flow coefficients.

Pressure:
Supply/Inlet Pressure: 5,000 psi (345 bar)
Regulated Pressure Range (manual): 300-3000 psi (21 – 207 bar)
Regulated Pressure Range (failsafe motor): 500-2400 psi (34 – 165 bar)
Fluid Temperature Range: -40° to +250°F (-40° to +121°C)
Proof Pressure: 7,500 psi (517 bar)
Burst Pressure: 12,500 psi (862 bar)

Flow:
Flow Rate: 70 GPM
Outlet Cv: 9.8
Vent Cv: 0.6

Porting:
Inlet:1” NPT
Outlet (regulated): 1” NPT
Vent: 1/2” NPT
Gauge Port: 3/8” NPT

Features: Barksdale’s Model 20313 is a sensitive pressure-control device used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy, repeatability and high flow coefficients.

Pressure:
Supply/Inlet Pressure: 5,000 psi (345 bar)
Regulated Pressure Range (manual):
High Sensitivity: 300 – 1600 psi (21 -110 bar)
Full Range: 300 – 3000 psi (21 – 207 bar)
Regulated Pressure Range (failsafe motor):
High Sensitivity: 300 – 1600 psi (21 -110 bar)
Full Range: 300 – 3000 psi (21 – 207 bar)
Fluid Temperature Range: -40° to +250°F (-40° to +121°C)
Proof Pressure: 7,500 psi (517 bar)

Flow:
Flow Rate: 45 GPM (@ 50/ft/s)
Outlet Cv: 6.7
Vent Cv: 6.7

Porting:
Inlet:1/2” NPT
Outlet (regulated): 1/2” NPT
Vent: 1/2” NPT
Bleed Port: 1/4” NPT

Features: TESCOM™ 50-2200 Series Pressure Regulator Hydraulic: 50-2200 Series pressure reducing regulator is specifically designed for extended life operation in high pressure hydraulic applications. Suitable for wellhead control panels, subsea valve actuation, chemical injection and Hydraulic Power Units (HPU).

Maximum Inlet Pressure: 15,000, 20,000 psig / 1034, 1379 bar
Maximum Outlet Pressure
300-15,000 psig / 20.7-1034 bar
300-20,000 psig / 20.7-1379 bar
Design Proof Pressure: 150% maximum rated
Leakage: 2 drops/min. at 150 S.U.S and 2500 psig / 172 bar
Operating Temperature: -15°F to 165°F / -26°C to 74°C
Flow Capacity: Cv = 0.06, 0.12

Features: TESCOM™ 50-4000 Series HPU Subsea Wellhead Regulator: 50-4000, 50-4100 and 50-4200 Series pressure reducing regulators, with their integrated bypass valve, reduce time to production and maintenance cost. These first-of-its-kind regulators control high pressure water glycol, decrease pressurization time and extend service life of the regulator. Ideal for hydraulic power units (HPU) and wellhead control panels.

Maximum Inlet Pressure: 10,000, 15,000 psig / 690, 1034 bar
Maximum Outlet Pressure
5500-15,000 psig / 380-1034 bar
3000-10,000 psig / 207-690 bar
3000-6000 psig / 207-414 bar
3000-4000 psig / 207-276 bar
Design Proof Pressure: 150% maximum rated
Leakage: 2 drops/min. at 150 S.U.S and 2500 psig / 172 bar
Operating Temperature: -15°F to 165°F / -26°C to 74°C
Flow Capacity: Cv = 0.12 (Control Regulator), Cv = 1.9 (Integrated Bypass)

Features: TESCOM™ 54-2100 Series Backpressure Liquid Regulator: 54-2100 Series backpressure regulator is suitable for 15,000 psig / 1034 bar liquid applications. Modifications are also available for 20,000 psig / 1379 bar and 30,000 psig / 2068 bar. Hardened Stainless Steel seat and stem provide excellent wear resistance in harsh applications. Ideal for use in pump discharge pressure control, chemical injection and burst testing.

Maximum Inlet Pressure: 15,000 psig / 1034 bar
Controlled Pressure Ranges
0-500, 0-800, 10-1500, 15-2500, 25-4000, 50-6000, 200-10,000,
300-15,000 psig
Design Proof Pressure: 150% maximum rated
Leakage: Maximum 2 drops/minute at 150 SUS at 2500 psig / 172 bar
Ambient Operating Temperature: -15°F to 165°F / -26°C to 74°C
Flow Capacity: Cv = 0.08
Maximum Operating Torque: 40 in-lbs / 4.5 N•m

Features: TESCOM™ 54-2200 Series Pressure Regulator Hydraulic: 54-2200 Series pressure reducing regulator is designed for high flow and high pressure hydraulic applications. Inlet and outlet pressure is rated up to 8000 psig / 552 bar with Cv = 2.0 for flows up to 60 GPM / 127 LPM. Spring, air and dome loaded versions are available. Hardened Stainless Steel seat and poppet delivers excellent wear resistance. Ideal for use in hydraulically operated blowout preventers (BOP), hydraulic power units (HPU) and hydraulic component testing.

Maximum Inlet Pressure: 8000 psig / 552 bar
Outlet Pressure Ranges: 1500, 3000, 5000, 6000, 8000 psig
Design Proof Pressure: 150% maximum rated
Leakage (maximum): 2 drops/min at 150 S.U.S at 2500 psig / 172 bar
Ambient Operating Fluid Media Temperature: -40°F to 200°F / -40°C to 93°C
Flow Capacity
Main Valve: Cv = 2.0
Vent Valve: Cv = 1.6

Features: TESCOM™ 54-2800 Series Pressure Regulator Hydraulic: 54-2800 Series high pressure, high flow, pressure reducing regulator is designed for hydraulic applications. Inlet and outlet rated up to 5000 psig / 345 bar; Cv = 8.0 for high flows. Air operated and dome loaded versions are available. Hardened Stainless Steel seat and poppet for excellent wear resistance. Ideal for use in hydraulically operated blowout preventers (BOP) and hydraulic component testing.

Maximum Inlet Pressure: 5000 psig / 345 bar
Outlet Pressure Ranges: 50-1500, 200-5000 psig / 3.4-103, 13.8-345 bar
Design Proof Pressure: 150% maximum rated
Leakage (maximum): 2 drops/min at 150 S.U.S. at 2500 psig / 172 bar
Operating Temperature: 0°F to 165°F / -17°C to 74°C
Flow Capacity
Main Valve: Cv = 8.0
Vent Valve: Cv = 6.5

Features: Barksdale’s Model 20495 Increased Sensitivity Regulator is a modified version of the Heavy Duty regulator, designed to allow more control at low pressures. This version offers better reaction time and better set point accuracy. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy, repeatability and high flow coefficients.

Pressure:
Supply/Inlet Pressure: 5,000 psi (345 bar)
Working Pressure: 3,000 psi (207 bar)
Regulated Pressure Range (manual): 300-2700 psi (21 – 186 bar)
Regulated Pressure Range (failsafe motor): 400-2400 psi (28 – 165 bar)
Fluid Temperature Range: -40° to +250°F (-40° to +121°C)
Proof Pressure: 7,500 psi (517 bar)

Flow:
Flow Rate: 70 GPM
Outlet Cv: 9.8
Vent Cv: 0.6

Porting:
Inlet:1” NPT
Outlet (regulated): 1” NPT
Vent: 1/2” NPT
Gauge Port: 3/8” NPT

Features: Barksdale’s Model 20337 is a sensitive pressure-control device used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy, repeatability and high flow coefficients.

Pressure:
Supply/Inlet Pressure: 3,000 PSI (207 bar)
Regulated Pressure Range (manual):
Base Model: 180 – 1600 PSI (12 – 110 bar)
-1 Model: 350 – 2800 PSI (24 – 193 bar)
API Compliance: API 16D, 4.3.2.2

Fluid Temperature Range: -40° to +250°F (-40° to +121°C)
Proof Pressure: 4,500 PSI (310 bar)
Burst Pressure: 7,500 psi (517 bar)

Flow:
Flow Rate: 120 GPM (@ 50 ft/s)
Cv 1 inlet: 11.4
Cv 2 inlet: 17.5

Porting:
Inlet 1: 1” NPT
Inlet 2: 1” NPT
Outlet (regulated): 1-1/2” NPT
Vent: 1/2” NPT

Features: Available from CEJN are swivel connections for high-pressure hydraulic applications. The swivels are especially suitable for use in confined areas and for bolt tensioner tools, torque wrenches, cylinders, bearing pullers etc. The swivel connections offer increased flexibility for hose kits and their swivel function allow a 360° movement up to full working pressure. This ensures that no twist or torque is transferred to the hose. As a result, the hoses’ service life is prolonged and the handling is made easier for the operator.

Material………………………………………………..Hardened, zinc plated steel
Max. working pressure…………………………1,500 bar (21,750 PSI)
Min. burst pressure………………………………3,000 bar (43,500 PSI)
Max. number of pressure cycles……………100,000*
Nominal flow diameter………………………….2.5 mm (3/32”)
Temperature range……………………………….-30°C to +100°C (-20°F to +210°F)
Flow capacity at pressure drop 4 bar…….6.0 l/min (1.47 GPM US)