Features: Glass-Trac Type 1 Offset Gauge Valves are available with screwed (S), union (U), and tubular (T) gauge connections. Type 1 valves are used with Reflex and Transparent Gauges in working pressures up to 4000 psi and with Tubular Gauges to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Type 1 valves have stainless steel ball checks to shut off the flow automatically in case of gauge glass breakage.

The “offset” feature permits easy cleaning of gauges. A floating tailpiece on Type 1 valves permits an overall vertical adjustment of 1/8” if the gauge center-to-centers are not precisely located. Installation is quicker and gauge strain is eliminated.

• Screwed Bonnet
• 4000 psig CWP 6000 psig Test
• ¾” NPT Male Union Tank Connection
• ½” NPT Female Gauge Connection
• ½” NPT Female Drain Connection

Features: The Questtec Solutions See-Level™ LED Illuminator for hazardous locations utilizes the latest technology to provide brilliant green back lighting to any process gage. Innovative circuitry allows for the use of an individual light source every ½” along the length of any gage. With a life span of over 100,000 hours each, the LED’s last 200 times longer than incandescent bulbs.

Brilliant Green LED Backlighting
Innovative Mounting Solution
Saves Money
Operates in Any Environment
Durable

Features: The Questtec Solutions See-Level™ Amber Illuminator for hazardous locations utilizes the latest technology to provide brilliant green back lighting to any steam gage. Innovative circuitry allows for the use of an individual light source every ½” along the length of any gage.

Brilliant Amber LED Backlighting
Amber lighting distinguishes liquid from steam
LED’s angled 45 for easy viewing of liquid meniscus
Innovative Mounting Solution
No-bolt cover removal
No flimsy, complicated brackets
Installs in minutes on any brand gage
Fits either side of transparent gages

Features: The Steam-Trac STBI-3000A Illuminator matches long lasting LED lamps to a rugged fabricated enclosure to set an unsurpassed standard of reliability for bi-color water gage illumination. Each port has 4 each red and green LEDs to provide a brilliant display. To comply with ASME Section I, PG60, a ported gage must provide a means for obvious discrimination between steam and water. This requirement mandates that a ported gage must have a working illuminator.By using LED lamps, the frequent maintenance associated with incandescent type lamps is virtually eliminated. When coupled with the Steam-Trac STB-3000 bi-color gage, users will experience a dramatic improvement in performance and extended maintenance cycles.

Brilliant 4-cluster red and green LED Lamps
Watertight, weatherproof, and corrosion resistant enclosure
Rugged, corrosion resistant, heavy walled aluminum alloy extensions
Compact, easy to handle design

Features: The Level-Trac water level indication product line is designed to satisfy the requirements of ASME Section I for “Independent Remote Water Level Indicators.” The underlying principle is the difference between the conductivity of water and the resistance of steam. Level-Trac water level indicator systems are typically comprised of three major components, a probe manifold or water column, a control unit, and a remote display. Level-Trac probe manifolds are built to last, featuring robust construction to perform in the rigorous environment adjacent to steam generation equipment.

One to Fourteen Probe Channels
4-20mA Output Signal
Field Programmable Alarm and Trip Points
Voting Logic for Trips
Serial Remote Display Signal
Sequence Fault Detection
Dual Power Supply

Features: Glass-Trac Type 1 Offset Gauge Valves are available with screwed (S), union (U), and tubular (T) gauge connections. Type 1 valves are used with Reflex and Transparent Gauges in working pressures up to 4000 psi and with Tubular Gauges to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Type 1 valves have stainless steel ball checks to shut off the flow automatically in case of gauge glass breakage.

The “offset” feature permits easy cleaning of gauges. A floating tailpiece on Type 1 valves permits an overall vertical adjustment of 1/8” if the gauge center-to-centers are not precisely located. Installation is quicker and gauge strain is eliminated.

• Screwed Bonnet
• 4000 psig CWP 6000 psig Test
• ¾” NPT Male Union Tank Connection
• ½” NPT Female Gauge Connection
• ½” NPT Female Drain Connection

Features: For low pressure water vessels, storage tanks, containers, etc. Glass-Trac provides Type 1TC carbon steel and 316 stainless steel valves for Tubular Gages. These valves are used with 5/8”, ½” or ¾” O.D. Pyrex Red Line, High Pressure or Heavy Wall Glass. Each valve contains a Stainless Steel ball check which closes the valve in the event of glass breakage.

Each 1TC has either a ½” or ¾” rigid vessel connection, plain closing stem and a straight pattern body. The maximum working pressure is dependent on the length and rated pressure of the glass. The 1TC valve can be used with 4 guard rods.

Features: The Disco Trac combines the operating system of a conventional float-based magnetic level indicator (MLI) with a (GWR) guided wave radar transmitter. This means you can enjoy reliable and accurate level measurement in a simple and elegant design. Using a 3”, 4”+ chamber to house both the GWR probe and the MLI float, these devices operate seamlessly to provide electronic guided wave radar measurement and visual indication. Disco-Trac provides two independent level technologies off a single set of process taps for true redundant measurement. A single chamber is achieved by adding a slotted baffle plate inside the chamber to separate float and GWR Probe. The Guided Wave Radar transmitter obtains the independent reading of the liquid level, providing an accurate output even in the case of float failure. The GWR will read the true level of fluid even if density of product varies.

Features: Magne-Trac products are among the safest and most economical ways to measure liquid levels, excelling in applications of extreme pressure, temperature, vibration, and corrosive or hazardous materials. Innovative Flag Design Maximizes Magnetic Field
Wide Flags for Enhanced Indicator View
Impact Resistant Polycarbonate Indicator Window
Corrosion Resistant Moving Parts
Wide Variety of Materials
Available to ASME 31.1/31.3 Standards

Measuring Range 12 to 600in (over 50ft consult sales)
Temperature Range -320°F to +1000°F (-196°C / +538°C)
Pressure Range Full Vacuum to 2800 psig
Specific Gravity As low as 0.35 SG (consult sales for lower)
Chamber Materials (Metal Alloys) 316 /316L or 304/ 304 Stainless Steel, Monel, Hastelloy C-276, Alloy 20, and other Non-Magnetic Alloys
Chamber Materials (Plastics/Composites) PVC, CPVC, AND PVDF
Float Materials Per application – 316 SST & Titanium are standard (exotic alloys available)
Indicator Flags 1.4” Wide Flag Assembly in Yellow/Black (Additional Colors Available on Request)
Indicator Housing Anodized Aluminum, Stainless Steel
Scale Ft/Inches (Std.), Metric, Percentage, Volume, etc. *Custom Scales Available
Visual Indication Easily visible from 200 ft.

Features: The Disco Trac combines the operating system of a conventional float-based magnetic level indicator (MLI) with a (GWR) guided wave radar transmitter. This means you can enjoy reliable and accurate level measurement in a simple and elegant design. Using a 3”, 4”+ chamber to house both the GWR probe and the MLI float, these devices operate seamlessly to provide electronic guided wave radar measurement and visual indication. Disco-Trac provides two independent level technologies off a single set of process taps for true redundant measurement. A single chamber is achieved by adding a slotted baffle plate inside the chamber to separate float and GWR Probe. The Guided Wave Radar transmitter obtains the independent reading of the liquid level, providing an accurate output even in the case of float failure. The GWR will read the true level of fluid even if density of product varies.

Features: Glass-Trac Type 1 Offset Gauge Valves are available with screwed (S), union (U), and tubular (T) gauge connections. Type 1 valves are used with Reflex and Transparent Gauges in working pressures up to 4000 psi and with Tubular Gauges to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Type 1 valves have stainless steel ball checks to shut off the flow automatically in case of gauge glass breakage.

The “offset” feature permits easy cleaning of gauges. A floating tailpiece on Type 1 valves permits an overall vertical adjustment of 1/8” if the gauge center-to-centers are not precisely located. Installation is quicker and gauge strain is eliminated.

• Screwed Bonnet
• 4000 psig CWP 6000 psig Test
• ¾” NPT Male Union Tank Connection
• ½” NPT Female Gauge Connection
• ½” NPT Female Drain Connection

Features: Glass-Trac Gauges, formally Daniel Level Gauge & Valve, are available in two main types: Reflex & Transparent. These direct reading instruments are available in many different materials to meet your specific process conditions. Glass-Trac Reflex Gages use prism glass to provide an excellent indication of the liquid level. All liquids appear black in contrast to the mirror-like surface above. This clean line of separation can be sighted from many yards away. Glass-Trac Transparent Gages use clear, see-through glass on both sides so that both the color and the interface of liquids can be viewed. Electric lighted gage illuminators are available for use on transparent gages and provide easy viewing of liquid levels in dimly lighted areas.

Reflex Pressure Series (Maximum 4000 PSIG @ 100F) & Ultra High Pressure, Up to 6000 PSI
Transparent Pressure Series (Maximum 3000 PSIG @ 100F)
Tapped for ½” or ¾” NPT Connection
Different Materials are Available to meet your specific Process Conditions
Standard to Fully Engineered Designs

Features: Magne-Trac products are among the safest and most economical ways to measure liquid levels, excelling in applications of extreme pressure, temperature, vibration, and corrosive or hazardous materials. Innovative Flag Design Maximizes Magnetic Field
Wide Flags for Enhanced Indicator View
Impact Resistant Polycarbonate Indicator Window
Corrosion Resistant Moving Parts
Wide Variety of Materials
Available to ASME 31.1/31.3 Standards

Measuring Range 12 to 600in (over 50ft consult sales)
Temperature Range -320°F to +1000°F (-196°C / +538°C)
Pressure Range Full Vacuum to 2800 psig
Specific Gravity As low as 0.35 SG (consult sales for lower)
Chamber Materials (Metal Alloys) 316 /316L or 304/ 304 Stainless Steel, Monel, Hastelloy C-276, Alloy 20, and other Non-Magnetic Alloys
Chamber Materials (Plastics/Composites) PVC, CPVC, AND PVDF
Float Materials Per application – 316 SST & Titanium are standard (exotic alloys available)
Indicator Flags 1.4” Wide Flag Assembly in Yellow/Black (Additional Colors Available on Request)
Indicator Housing Anodized Aluminum, Stainless Steel
Scale Ft/Inches (Std.), Metric, Percentage, Volume, etc. *Custom Scales Available
Visual Indication Easily visible from 200 ft.

Features: Questtec Direct-Reading Level Gauges are a simple and reliable way to determine the level of liquid in a tank or vessel, because they give you a direct view without compromising the integrity of your process system. Questtec level gauges operate such that the liquid level in the transparent sight tube is always the same as the liquid level inside the tank or vessel. Questtec Armored Tubular level gauges can be used at operating pressures up to 285 psig. For higher operating pressures, use Questtec’s Magne-Trac Magnetic Level Indicator, Steam-Trac, or Glass-Trac Gauges.

• Threaded ½ to 1 in. MNPT (TC)
• Flanged ½ to 2 in. (FC)
• Carbon steel, 316 SS or CPVC
• Socket weld or weld neck flanges are available
S Calibrated scale: Polycarbonate
S Level floats: Orange PP ___ Teflon ___
S Explosion-proof illuminator
S Sight tub redlining
S Vent and drain valves: Carbon Steel ____316 SS

Features: Glass-Trac Welding Pad Gauges are used when standard tank connections cannot be used or when the liquid has solids in suspension. The gage becomes an integral part of the vessel because it is welded right onto the outer wall. Reflex or Transparent glass is used in any of nine standard lengths. Standard covers are 3⅛” wide.

Integral part of vessel welded onto the outer wall
Reflex & Transparent Weld Pad Gages available
Available in 9 Standard sizes
Radius configuration available for rounded tanks

Features: Questtec Solutions offers several gage valve & steam valve options suitable for a variety of applications. Our valves provide an automatic shut off for glass and steam level gage products. QTS gage valves and steam valves are available in an assortment of arrangements such as union, integral, bolted bonnet, renewable seat, offset design, OS&Y design, etc.

Questtec Solutions steam valves are designed specifically for use with water level gages in steam/water service. The angled flow path compactly eases installation of the level gage, bringing the assembly connection point to the side. Each model is designed to prevent steam galling and maximize packing life to extend the longevity of the valve.

Features: Questtec’s extensive Steam-Trac product line was designed to offer several models of water level/steam level gages with pressure from 300 PSI working steam pressure to 3000 PSI working steam pressure. The Steam-Trac product line fully complies with the ASME Section I requirement for Direct Reading Gage Glass. Steam-Trac products are designed specifically for the rigorous service condition of steam generation, and consistently yield lower maintenance cost than than competitive products.

For 3000 PSI Working Steam Pressure (WSP)
Fully compliant with ASME as a Direct Reading Water Gage
Continuous one-piece chamber
Innovative LED Illuminator design
Custom built per specifications
Bolts are nickel plated
High temperature coating

Features: The QTS Maverick In-Tank transmitter is configured with a flexible cable constructed of 316L stainless steel that can be ordered in lengths from 120 inches to 866 inches with a 4-20mA. Once installed and calibrated there is no requirement for scheduled maintenance or recalibration.

Modular design
• High accuracy and repeatability
• Two channel output available
• Multi-drop HART communication
• Explosion-proof and / or intrinsically safe
(model dependent)
• No maintenance required
• ± 2.7°F (±1.5°C) accuracy on temperature output